Product Care And Maintenance - Gtech SC01 Operating Manual

Product care and maintenance

Switch off and remove the plug from the mains power supply before any carrying out any
cleaning or maintenance.
Your product doesn't need much maintenance: keep the filter, water tanks, and brush
clean, and wipe the outside with a dry cloth if it gets dirty, including under the water tanks.
The cleaning head can be removed from the
hose to clean.
Push the button and pull the brush to remove.
1
To re-fit the cover locate the bottom edge and
then clip into place.
10
5824_Spot_Cleaner_manual_aw.indd 10 5824_Spot_Cleaner_manual_aw.indd 10
1
2
2
The front cover of the cleaning head can be
removed to clean.
The water tanks can be rinsed with clean
water. Use cold or warm water, maximum
temperature 40°C
WARNING: do not use boiling water.
Do not clean in a dish washer.
Do not use water, solvents, or polishes to clean
the outside of the appliance; wipe clean with
a dry cloth.
10/12/2024 14:54 10/12/2024 14:54