WMF 1500 F Planning Information

Hide thumbs Also See for 1500 F:

Download this manual

WMF 1500 F planning information

optional grounds through

counter cut out

https://www.wmf-coffeemachines.com/en_com/planner-data/

WMF GmbH | Professional Coffee Machines | WMF Platz 1 | 73312 Geislingen (Steige)

On site

(angle

valve)

On site

Optional:

Area for lines and hoses

for counter cut out waste

water

Minimum 50x60 or Ø70

Optional:

Area for lines and hoses for

counter cut out water, power

Minimum Ø85 for 5.7 –

6.75kW

Length

Need help?

Do you have a question about the 1500 F and is the answer not in the manual?

Page 1 Optional: Area for lines and hoses for counter cut out water, power On site Minimum Ø85 for 5.7 – 6.75kW Length (angle valve) On site https://www.wmf-coffeemachines.com/en_com/planner-data/ WMF GmbH | Professional Coffee Machines | WMF Platz 1 | 73312 Geislingen (Steige)
Page 2 The WMF service engineers may only connect the coffee machine to existing prepared connection points. WMF Service is neither authorised nor responsible for carrying out any on-site installation work prior to connection. In order to avoid possible faults from arising on our shielded data lines due to potential equalisation currents between the devices, an additional potential equalisation unit should be planned for devices connected to the vending system.
Page 3 (see top view). For drinking water with carbonate hardness above 5°dKH (carbonate hardness), a WMF water filter should be fitted upstream. If the coffee machine is connected to a drain connection, a funnel siphon must be installed in the drain pipe.
Page 4 For more information as the instruction manual , safety data sheets and certificates , see: https://coffeeconnect2.wmf.com All information refers to coffee machines/ equipment as standard version. Individual solutions can differ from the standard version. https://www.wmf-coffeemachines.com/en_com/planner-data/ WMF GmbH | Professional Coffee Machines | WMF Platz 1 | 73312 Geislingen (Steige)