Table of Contents
Advertisement
5.
APPENDIX:
Troubleshootinq
No Power
•
Make sure power cord is securely connected
to the "AC In" jack on the
back of the High Definition LCD TV.
•
Make sure AC power cord is securely connected to the AC socket.
•
Plug another electrical device (such as a radio) to the power outlet to
verify that the outlet is supplying the proper voltage.
Power is suddenly
turned off
•
Check if Sleep Timer is set. If so, turn it off.
Remote
Control
Does Not Work
•
Press only one button at a time.
•
Point remote control closer and directly to the IR sensor.
•
Make sure batteries are inserted correctly.
•
Replace batteries with new ones if necessary.
Remote
Control Code Not Found
in a "Universal"
Remote
•
Purchase a separate "learning" remote control.
•
Go to www.westinqhousediqital.com
for a list of remote codes.
Image Quality
Issues
•
For the best TV image quality, "Standard Definition" TV content should
be viewed in Standard display format.
No Picture
•
Check the video connection.
•
Make sure the video cable connected
to the High Definition LCD TV is
tightly secured to the video output port on the back of the computer
or
any attached audio/video
apparatus.
If the other end of the video cable
is not attached permanently
to the High Definition LCD TV, secure it
tightly.
•
Adjust brightness and backlight.
•
Make sure that the input source you are connected
to corresponds
to the
source on the High Definition LCD TV.
•
Verify that the antenna is properly connected.
No Picture
when I connect
VGA cable or "No Input Signal"
•
Check VGA cable connection.
•
Lower the video resolution on the computer and try plugging in the cable
again.
38
Advertisement
Table of Contents
