IMPORTANT INFORMATION HOW TO INSTALL THE STAND PREFACE SAFETY PRECAUTIONS CONTENTS FRONT/BACK CONNECTIONS OF LCD TV TV INSTALLATION REMOTE CONTROL MENU OPERATION TROUBLESHOOTING SPECIFICATIONS TABLE OF CONTENTS Power Cord Connection Antenna Connection AV Connection YPbPr (c omponent ) Connection VGA ( PC ) Connection Service Port Function HDMI Connection Remote control instructions in TV mode...
IMPORTANT INFORMATION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is interded to aler the user to the presence of important operating and maintenance (servicing) instruction the literature accompanying the appliance.
Page 5
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11.Only use attachments / accessories specified by the manufacturer. 12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
Page 6
HOW TO INSTALL THE STAND (MPW4X20) MPW4X12 MPW4X12...
PREFACE Thank you for buying this Please read this manual thoroughly before operating the TV. Make sure the TV was not damaged in transit. Should the TV be damaged, do not install it and contact your dealer. Check that you have all the accessories according to the model. SAFETY PRECAUTIONS Put the TV on a stable surface.
Page 8
SAFETY PRECAUTIONS Keep the TV dry and away from humidity. Keep the TV away from heat sources . Unplug the TV before cleaning it. Do not use solvent or liquid to clean the TV. Only clean the TV with a soft and dry cloth. In case of troubleshooting, do not use spare parts other than those suggested by the manufacturer.
Page 9
CONTENTS 5. CONTENTS LCD TV SET Remote Control 1.5V USER ' S MANUAL AAA Batteries Quick Connect Guide Warranty Card Quick Connect Guide Warranty Card...
Page 10
FRONT/BACK CONNECTIONS OF LCD TV 6. FRONT/BACK CONNECTIONS OF LCD TV Back View and Control Connections SERVICE INPUT Blue when TV is powered on. Red when TV is powered off. No color when power switch is turned off. (Shared audio with AV IN) S-VIDEO:S-VIDEO input.
TV INSTALL TION Power Cord Connection - Connect the power cord correctly as shown. - Press the POWER switch of your LCD TV to switch on the LCD TV. The power indicator on the front panel lights up in red or green. Antenna Connection To ensure good picture and sound, TV antenna system needs to be installed.
TV INSTALL TION Connect the VIDEO and AUDIO output jack of the DVD or VCR to the VIDEO jacks on the set using the RCA cable. Match the jack colors: Video is yellow, Audio left is white, and Audio right is red. Select the AV input source using the SOURCE button on the remote control.
VGA(PC) Connection Connect the RGB output of the PC to the The PC to the PC AUDIO jack on the set . Select the RGB input source with using SOURCE button on the remote control. SERVICE Audio Cable AUDIO RGB-PC OUTPUT Service Port Function Service port: (For factory uses only.) SERVICE...
TV INSTALL TION HDMI Connection HDMI plug which replaces the HDMI connection allows transfer of all audio/video/control signals through one cable only. These signals are transferred in digital. SERVICE HDMI Cable DVD Back RF IN TV Back...
8 REMOTE CONTROL Remote control instructions in TV mode REMOTE CONTROL POWER Turn the LCD TV ON or OFF. MUTE Press to mute the sound. Press again or press VOL+ to un-mute the TV. NUMBER BUTTONS Press 0-9 to directly change the TV channel. Press this button to enter a program number for multiple program channel such as 2-1,etc.
REMOTE CONTROL Remote control setup 1. Open the cover. 2. Uses AAA size batteries.When inserting the batteries, make sure correct polarities “+”and “-” marks on the batteries line up correctly with compartment markings. 3. Replace the battery cover. To prevent battery leakage which may result in bodily injury or damage to the remote: 1.
9.Menu Operation Select Language Select Language Welcome to the Westinghouse HDTV Setup Wizard. Fllow this guide to help setup your HDTV for Scanning channels or accessing your external devices for cable,satellite,Blu-ray,DVD,and gaming. use the up and Down arrows on your remote control to select the language to use for menus and message screens.
To enable your Tv’s tuner you will need the following access information:Model(see above),Channel scan Type:ATSC, Serial Number(see above). Provide these items to Westinghouse Digital’s Channel Access Service by phone or web to obtain an access code, then select next to enable your Tv’s tuner.
Operating the Menu 1.Press the POWER button to turn the LCD TV on. 2.Press the MENU button on the remote control, the on-screen menu will appear on the screen. 3.Use the LEFT and RIGHT buttons to select your main menu option. PICTURE MENU: Allows you to make adjustments to your picture settings.(select TV source for example)
MENU OPERATION 4.Use the UP/DOWN buttons to select an option of the sub-menu, and press the RIGHT button. While in adjustment mode, use the LEFT/RIGHT button to change the value of the item. 5.Press the MENU button to exit the menu. Note: Only when you input the suitable signal, the relevant items can be activated.
Select TV source for example. 1. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the AUDIO. 2. Use the UP and DOWN buttons to highlight an individual AUDIO option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit the menu.
MENU OPERATION The TIMER menu includes the following options : Sleep Timer Allows you to set up the sleep timer among: 5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min and off. Time Zone Allows you to set up the sleep timer among: Pacific, Alaska, Atlantic, Hawaii, Eastern, Central and Mountain.
Page 23
Close Caption Use Down button to highlight the Close Caption item, then press RIGHT button to enter into the following menu. CC Mode Allows you to select the CC Mode among: On, Off and CC on Mute. Basic Selection Allows you to select the basic selection among: CC1, CC2,CC3, CC4, Text1, Text2, Text3 and Text4.
MENU OPERATION Select TV source for example. 1. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the LOCK 2. Use the DOWN button to highlight the “Enter Password”item, use the numeric keys to input 4-digital password, then the screen will display the junior menu.
Page 25
Use Down button to highlight the “TV”item, then press RIGHT button to enter into the following menu. Setu p Pictur e Audio Time Lo ck RATING AL L TV Y TV Y7 TV G TV PG TV 14 TV MA Bloc k Press OK to Lock or Unlock Move...
MENU OPERATION Select TV source. 1. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the CHANNEL. 2. Use the UP and DOWN buttons to highlight an individual CHANNEL option, use the LEFT and RIGHT buttons to change the setting, and press the MENU button to exit.
Page 27
Favorite Allows you to add these channels which you desired as the favorite channels. Use UP or DOWN button to highlight the “Favorite”item, then press RIGHT button to enter into the following menu. Use UP and DOWN button to highlight the desired item, then press OK button to add or remove the highlighted channel as favorite.
Troubleshooting Please check if you can solve problems by troubleshooting yourself . Troubleshooting No signal Please check that all cables are correctly plugged in. Adjust the contrast, the color and the brightness. No color shades May be the result from a lighting signal from car, motor, neon light Stain on the and other electrical devices or appliances.
SPECIFICATIONS 11. SPECIFICATIONS This manual is only for your reference, any change to the design and specification will not be advised. Screen Size Display Type Resolution(Pixel) Aspect Ratio Power Supply Power Consumption TV System Video Input Format Audio Output Power ANTENNA AV-IN YPbPr - IN...
Need help?
Do you have a question about the VR-6025Z and is the answer not in the manual?
Questions and answers