TABLE OF CONTENTS IMPORTANT SAFETY AND PRECAUTIONS ...1 Important Information...1 Safety Precautions...2 Important Safety Instructions...4 GENERAL INFORMATION...6 Feature...6 Controls and Ports of the Panel...7 Accessories ...9 Remote Control...10 INSTALLATION AND FUNCTION ADJUSTMENT ...12 Installation...12 How to remove the BASE...15 Function adjustment ...16 TROUBLESHOOTING ...27 PC INPUT PRESET TIMMING TABLE...30 PRODUCT SPECIFICATION ...31...
IMPORTANT SAFETY AND PRECAUTIONS This wide active matrix TFT (thin film transistor) liquid crystal monitor is designed for use as a stand alone TV as well as a display device for video electronics appliances and personal computers. Important Information Warning : To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
Safety Precautions 1. Cleaning : Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. 2. Water and moisture : Do not use the product near water or areas of high moisture content such as swimming pools, bathtubs or wet basements.
Page 6
7. Stand : Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Page 8
13. Unplug the apparatus during lightening storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in an way, such as power-supply cord is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has dropped.
GENERAL INFORMATION Feature Your TV is designed with the latest technology and is a high-performance unit that includes the following special feature : Multi-sources input included RF IN, D-SUB, HDMIx2, Compositex2, S-Videox2, and Componentx2. Built-in combo tuner is able to receive ATSC, NTSC and Clear QAM Cable signals. Built-in 15W dual channel speakers.
Controls and Ports of the Panel Remote sensor window & Power indicator FUNCTION KEYS MENU : Display the main menu. When OSD is appeared, press the button to select or access the sub-menu. 2. VOLUME (+ / -) : Increase/decrease the volume or be the left/right arrow button for menu. 3.
Page 11
1. HDMI1 input Connect to an external video device such as HD digital cable/satellite receiver, HD STB, Media center PC, or DVD player 2. HDMI2 input 3. HDMI Audio input(R/L) Connect the audio input if you using a DVI-to-HDMI converter. 4.
Remote Control Power Switch TV power on/off. Mute Turn the sound on/off. Swap No support No support Backlight Adjust the LCD Backlight level Sleep Press to select a preset time interval for automatic power down. Press to enable or disabled closed caption. Favorite Select, remove or add your favorite channel.
Page 14
Guide Broadcast program information. Info. Display the source and channel information. YPbPr1 Select YPbPr1 or 2 source input. Select TV(NTSC/ATSC) source input. Select VGA source input. HDMI Select HDMI 1 or 2source input. YPbPr2 Select YPbPr2 source input. No support. Video Select Video 1 or 2 input.
NOTES .Dot : The Dot Drop List is menu list of all the virtual channels available on the current physical channel for the user to select. The user can utilize this function for quicker access to all the available virtual channels instead of channeling through each channel.
Page 17
3. Connect power cables Connect the power cord to the LCD TV then to a proper AC outlet. IMPORTANT: The power input voltage for TV is 120Vac, before beginning; make sure all devices are turned off. 4. Turn Power On Press the power button on the right side of the LCD TV, or press the power (Red) button on the remote control.
How to remove the BASE a. Carefully place the TV face down on a soft clean surface. b. Remove the four screws underneath the BASE. (See picture below) c. Pull out the BASE from the TV.
Function adjustment There are four main Setup Menus; these are Settings, Channels, Locks and Guide. All the functions can be adjusted either by the remote control or by using the control keys on the LCD TV’s right side. Viewing OSD Menu To display the main menu, press the Menu button on the right side of front control keys of the LCD TV or the MENU key on the remote control.
Page 20
Video settings: Press arrow keys to select or adjust your favorite picture settings. DONE button to close picture setting menu. Screen Fit: Adjust your TV screen to handle different picture formats. Standard/Fill/Overscan Color Temp.: Press arrow keys to select or adjust your preferred color temperature settings.
Audio Setting Bass, Treble & Balance Use arrow keys to adjust the bass, treble and balance. Optical Out Select AC3/PCM Analog Preference Select an analog audio preference if TV signal is analog. Mono/Stereo/SAP Digital Preference Select language preference for digital channels. English/French/Spanish Settings...
Page 22
Close Captions Basic Selection Choose the type of closed caption settings to use for programs broadcast with basic caption. Advanced Selection Use arrow keys to adjust closed caption appearance such as font and size, each change can be previewed on bottom of menu. Caption Preference Select Always Basic/Always Advanced/Automatic.
Page 23
Date & Time Set Date & Time. Menu Language Use arrow keys to adjust Menu Language Input Autosource™ Autosource™ will detect a new incoming signal and automatically switch the input source to the connection of the new source’s device.
Power Management Set TV power saving modes(Normal/quick boot-up time, but large power consumption; Energy saving/longer boot-up time, but small power consumption.) Power On Plug Set TV power on memory when un-plug power cord and re-plug it.(ON/automatic power-on memory; OFF/no automatic power-on) DVD Restoration Converts “Standard”...
RESET ALL Reset all settings back to factory defaults. Reset will delete all settings you have made including channel list. Channels Master Channel list To display which channels have been scanned. Scan Channels To auto scan current available channels by using “Antenna or cable” scan.
Page 26
Favorites To display which channels have been set for Favorites. Find Channel Enter channel number via number key then press DONE button to find a channel. You may be required to enter four digits pin number if pin number was set before. Channel Name Edit Edit the channel name in channel list.
Page 27
Locks Lock feature prevents viewers from watching programs that are not age-appropriate, such as programs containing violence or adult language. The pin number is required when you want to enter Locks menu, just use the remote control to key in your pin number. The factory default pin number is 0000. Rating Locks Select which USA or Canada rating you want to set.
USA Movie Rating General audience Parental guidance suggested PG-13 Parental strongly cautioned Restricted NC 17 No on 17 and under admitted Adult audience only Canada-French General programming, suitable for all audience 8 ans+ Children eight years and older 13 ans+ Viewers 13 year and older 16 ans+ Viewers 16 year and older 18 ans+ Adult programming Canada-English...
Page 29
Guide Show program information for the current channel, such as signal strength, resolution, channel number, V-chip, CC, and Program Title.
TROUBLESHOOTING There is no picture or sound. ▪ Make sure the AC adapter is connected. ▪ Verify that there is a valid source signal. ▪ Make sure the correct input mode is selected. There is no picture from AV. ▪ Make sure the BRIGHTNESS is properly adjusted. ▪...
Page 31
Picture is light or improperly tinted. The picture is too dark. Remote control does not work. There are stripes on the screen or colors fade. ▪ Check the Hue, Saturation and Color adjustments. ▪ Reset the TV to the factory default settings. ▪...
Page 32
The picture is not sharp. ▪ The signal source may be weak. ▪ The provider may be experiencing difficulties. ▪ Check input connections. ▪ Check the Sharpness of Picture Settings. The picture moves. ▪ The source signal may be weak. ▪...
PRODUCT SPECIFICATION ITEMS Screen Size Aspect Ratio Panel Resolution Display colors Viewing Angle (CR>10) Broadcasting System Receiving Channel TV Function Sound System Resolution Data Broadcasting Composite Signal Video Input Y, C Signal Component Signal HDMI Connection PC Input VGA Connection Scanning Frequency Audio 1 Audio Input...
Page 36
Westinghouse Digital Electronics Santa Fe Springs, CA SE-UM-4002-0701...