Key Automation RXM5A Instructions And Warnings For Installation And Use page 7

5 - TESTING AND COMMISSIONING
The system may be put into operation after testing by a qualified technician,
who must perform the tests required by the relevant standards in relation
to the risks present, to check that the installation complies with the relevant
regulatory requirements.
6 - DISPOSAL
Packaging components (cardboard, plastic, etc.), duly separated, must be
placed in the appropriate bins. Device components such as electronic boards,
metal parts, batteries, etc. must be separated and differentiated. For the
methods of disposal, the rules in force in the place of installation must be
applied. DO NOT DISPOSE IN THE ENVIRONMENT! KEY AUTOMATION
reserves the right to amend these instructions if necessary; they and/or any
more recent versions are available at www.keyautomation.com
7 - DECLARATION OF CONFORMITY
The manufacturer:
Key Automation S.r.l. via Meucci 23, 30027 San Donà di Piave (VE) – ITALY
Declares that the product type:
RXM5A
433.92 MHz 4-channel radio receiver with 5 A relay
Models:
900RXM5A
is in compliance with the Union directives:
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
In accordance with the following harmonized standards:
EN 301 489-1 V2.2.3:2019, EN 301 489-3 V2.3.2:2023
EN 300 220-1 V3.1.1:2017, EN 300 220-2 V3.2.1:2018
EN 62479:2010
EN 62368-1:2014
This declaration of conformity is issued under the sole responsibility of the manufacturer.
San Donà di Piave (VE), 03/02/25
Chief Executive Officer
Nicola Michelin
EN
7