Attachments And Accessories - General Instructions - KitchenAid KSM150PS - Artisan Series Mixer User Manual

ATTACHMENTS AND ACCESSORIES
General Information
KitchenAid ® attachments are designed to assure long life. The attachment
power shaft and hub socket are of a square design, to eliminate any
possibility of slipping during the transmission of power to the attachment.
The hub and shaft housing are tapered to assure a snug fit, even after
prolonged use and wear. KitchenAid
unit to operate them; the power unit is built in.
Hub
Attachment
Hub Socket
‡ Not part of mixer.
GENERAL INSTRUCTIONS
To Attach
1.
Turn the speed control to OFF.
2.
Unplug mixer or disconnect power.
3.
Loosen the attachment knob by turning it counterclockwise, and
remove the attachment hub cover.
4.
Insert the attachment shaft housing into the attachment hub, making
certain the attachment power shaft fits into the square attachment hub
socket. It may be necessary to rotate the attachment back and forth.
When the attachment is in proper position, the pin on the attachment
will fit into the notch on the hub rim.
5.
Tighten the attachment knob by turning it clockwise until the
attachment is completely secured to mixer.
6.
Plug mixer into a proper electrical outlet.**
To Remove
1.
Turn the speed control to OFF.
2.
Unplug mixer or disconnect power.
3.
Loosen the attachment knob by turning it counterclockwise. Rotate the
attachment slightly back and forth while pulling it out.
4.
Replace the attachment hub cover. Tighten attachment knob by turning
it clockwise
attachments require no extra power
®
Attachment
Knob
Notch
Pin
Attachment
Shaft Housing
17
17
Attachment
Power Shaft ‡
‡
‡
** See page 6.