Scheppach AVC25 Translation Of Original Instruction Manual page 23

13. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Engine does not run.
Reduced vacuuming
power.
Possible cause
Check whether the plug is plugged in.
Check whether there is power to the
socket.
Check whether the on/off switch is
switched on.
Device blocked.
The filter must be cleaned.
Filter is full of dust.
www.scheppach.com
Remedy
Plug the mains plug back in to the socket.
Call an electrician.
Switch the on/off switch on.
Remove the blockage.
Clean the filter.
Remove and empty the filter.
GB | 23