Table of Contents
Advertisement
Quick Links
3M™ DBI-SALA® Floor Mount Davit Base
User Instructions
Form Number: 5908360, Revision: E
This product is certified to or conforms with the following standards and regulations. Certification and conformance may
be restricted to individual product models or applications. For more information, see Certifications .
•
OSHA 29 CFR 1910.140, 1926.502
•
EN 795:2012 (Type A)
•
CEN/TS 16415:2013 (Type A)
•
EN 1496:2006 (Clause 4.6)
•
AS/NZS 5532:2013
⚠W A RN I NG :
For identification of product codes, refer to the product specification tables. See the Product Overview for more product
information.
Some components may not be certified individually and may require assembly to meet certification requirements.
Model
Style
8000095
A
8000096
A
Figure 1 - Product Overview
D1
D2
4.0 in. (10.2
9.5 in. (24.2
cm)
cm)
4.0 in. (10.2
9.5 in. (24.2
cm)
cm)
D3
D4
5.0 in. (12.7
12.0 in. (30.5
cm)
cm)
5.0 in. (12.7
12.0 in. (30.5
cm)
cm)
D5
Product
Weight
0.88 in. (22.2
34.4 lb. (15.6
mm)
kg)
0.88 in. (22.2
34.4 lb. (15.6
mm)
kg)
© 3M 2024
Advertisement
Table of Contents
Related Manuals for 3M DBI-SALA Floor Mount Davit Base
Summary of Contents for 3M DBI-SALA Floor Mount Davit Base
- Page 1 3M™ DBI-SALA® Floor Mount Davit Base User Instructions Form Number: 5908360, Revision: E This product is certified to or conforms with the following standards and regulations. Certification and conformance may be restricted to individual product models or applications. For more information, see Certifications .
-
Page 2: Safety Information
Ensure there is sufficient fall clearance when working at height. Never modify or alter your Fall Protection equipment. Only 3M, or persons authorized in writing by 3M, may make repairs to 3M equipment. Before using Fall Protection equipment, ensure a written rescue plan is in place to provide prompt rescue if a fall incident occurs. -
Page 3: Product Overview
Product Overview Always ensure you are using the latest revision of your 3M instruction manual. Visit www.3m.com/ userinstructions or contact 3M customer services for updated instruction manuals. Before using this equipment, record the product information from the ID label in the ‘Inspection and Maintenance Log’... -
Page 4: System Specifications
Product Specification Tables System Specifications User Capacity: See the manufacturer instructions for compatible davit models for more information on system capacity. Component Specifications Figure 2 Component Materials Reference Davit Sleeve 8000095: Carbon Steel (hot dipped galvanized) 8000096: Stainless Steel (shot blast) Liner High-Density Polyethylene... -
Page 5: Product Application
Connectors must be fully closed and locked during use. 3M Connectors (snap hooks and carabiners) are designed to be used only as specified in each instruction manual. Ensure connectors are compatible with the system components to which they are connected. Do not use equipment that is noncompatible. - Page 6 In a false engagement, where size or shape of the connector or connecting element is not compatible and, without visual confirmation, would seem to be fully engaged. To each other. Directly to harness webbing, lanyard leg material, or tie-back material unless such a connection is explicitly allowed for by the manufacturer instructions.
-
Page 7: Installation
3.0 Installation 3.1 Overview: Installing a davit system can be a lengthy procedure with multiple steps. Effective planning and awareness of your worksite and your equipment are of great help in making this process move as smoothly as possible. 3.2 Planning: Plan your Fall Protection system before starting your work. Account for all factors that may affect your safety before, during, and after a fall. - Page 8 “DO NOT USE”. See Section 5 for more information. 4.4 Material Handling: 3M permits use of this product for material handling as directed. Local regulations or standards may have additional restrictions or may regulate using fall protection equipment for material handling.
- Page 9 5.3 Defects: If the product cannot be returned to service because of an existing defect or unsafe condition, then the product must be either destroyed or sent to 3M or a 3M-authorized service center for repair. 5.4 Product Life:The functional life of the product is determined by work conditions and maintenance. As long as the product passes inspection criteria, it may remain in service.
- Page 10 Bases that are permanently installed should not leave the work location. Other components may be removed from these bases for storage or transport, but the base will have to remain. ⚠W A R N I N G : Sudden transitions between warm and extremely cold environments could affect the performance of your equipment.
-
Page 11: Labels And Markings
Definitions: The following terms and definitions are used in these instructions: For a comprehensive list of terms and definitions, please visit our website: www.3m.com/FallProtection/ifu-glossary • Authorized Person: A person assigned by the employer to perform duties at a location where the person will be exposed to a fall... - Page 12 • Competent Person: One who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them. • Fall Arrest System: A collection of Fall Protection equipment configured to protect the user in the event of a fall. •...
-
Page 13: Inspection And Maintenance Log
Inspection and Maintenance Log A copy of this table should be used for each inspection. Record information below. Manufacturer: 3M Fall Protection Model Number (Serial Number): Date Purchased: Date of First Use: This product must be inspected by the user before each use. Additionally, a Competent Person other than the user must inspect this equipment at the intervals specified in Section 5. - Page 14 Certifications Your product conforms to the national or regional standards identified on the front cover of these instructions. Certification and conformance may be restricted to individual product models or applications. For more information on certification or conformance requirements, refer to the applicable standards and regulations listed for your product.
- Page 15 Limited Remedy: Upon written notice to 3M, 3M will repair or replace any product determined by 3M to have a factory defect in workmanship or materials. 3M reserves the right to require product be returned to its facility for evaluation of warranty claims. This warranty does not cover product damage due to wear, abuse, misuse, damage in transit, failure to maintain the product or other damage beyond 3M’s control.
Need help?
Do you have a question about the DBI-SALA Floor Mount Davit Base and is the answer not in the manual?
Questions and answers