Installing The Windows 98 Device Driver - Sony M-PF88E Operating Instructions Manual

Installing the
Windows 98
Device Driver
This section explains how to install the
USB Floppy Disk Drive device driver on
a system running Windows 98.
To install the device driver
1
Insert USB Floppy Disk Drive
Device Driver CD-ROM into the
CD-ROM drive of your
computer.
2
Connect the USB connector of
the USB Floppy Disk Drive to
the USB port of your computer.
The Add New Hardware wizard
starts and the following dialog box
appears.
GB
10
3
Click [Next].
The following dialog box appears.
4
Select "Search for the best
drivers for your device
(Recommended)", and then
click [Next].
The following dialog box appears.
5
Select the "Specify a location"
check box and type "X:\Win98"
(where X is your CD-ROM drive
letter) in the box, and then click
[Next].
The following dialog box appears.