Installing The Windows 98 Device Driver - Sony MPF88E-UA Operating Instructions Manual

Installing the
Windows 98
Device Driver
This section explains how to install the
drive device driver on a system running
Windows 98.
To install the device driver
1
Insert USB Floppy Disk Drive
Device Driver CD-ROM into the
CD-ROM drive of your
computer.
2
Connect the USB connector of
the drive to the USB port of
your computer.
The Add New Hardware wizard
starts and the following dialog box
appears.
3
Click [Next].
The following dialog box appears.
4
Select "Search for the best
drivers for your device
(Recommended)", and then
click [Next].
The following dialog box appears.
5
Select the "Specify a location"
check box and type "X:\Win98"
(where X is your CD-ROM drive
letter) in the box, and then click
[Next].
The following dialog box appears.
6
Confirm the location of the
device driver.
Note
If the location is not
"X:\WIN98\SONYUFD1.INF" (where X
is your CD-ROM drive letter), click
[Back] and return to step 4.
Continued
GB
15