Download Print this page

emaux SUPERPOWER SPV125 User Manual

Variable speed pump with wi-fi and modbus options

Advertisement

Quick Links

SUPER POWER
VARIABLE SPEED PUMP
With Wi-Fi AND MODBUS OPTIONS
USER MANUAL
Model: SPV125 / SPV165
24121980

Advertisement

loading
Need help?

Need help?

Do you have a question about the SUPERPOWER SPV125 and is the answer not in the manual?

Questions and answers

Summary of Contents for emaux SUPERPOWER SPV125

  • Page 1 SUPER POWER VARIABLE SPEED PUMP With Wi-Fi AND MODBUS OPTIONS USER MANUAL Model: SPV125 / SPV165 24121980...
  • Page 2: Risk Of Electrical Shock

    WARNINGS AND SAFETY INSTRUCTIONS GENERAL WARNING This instruction contain general caution information for use in Pool and SPA pump installation application. Specified Pump model function should be refer to particular manual. Components such as the filtration system. pumps and heater must be positioned so as to prevent their being used as means of access to the pool by young children. RISK OF ELECTRICAL SHOCK This appliance should be installed by qualified electrical personnel in accordance with National Electrical Code and all applicable local codes and...
  • Page 3 SUCTION ENTRAPMENT HAZARD This pump produces high levels of suction and creates a strong vacuum at the main drain at the bottom of your pool and spa. This suction is so strong that it can trap adults or children under water if they come in close proximity to a pool or spa drain or a loose or broken drain cover or grate.
  • Page 4: Basic Operation

    USER MANUAL Control and LED Description 1) Speed Display Displays the current motor speed, menu or error codes. 2) "SET” Button Used to enter set menu (hold for at least 3 seconds). 3) Speed 1/▼ Button " ” Selects preset Speed 1 or reduce speed in set menu. "Speed 2 ”...
  • Page 5 4. Press the “OK” button to save the priming speed setting. The priming time will then begin to flash in the LED window. To cancel and return to the previous mode, press the “SET” button. 5. Press the “1/▼ ” button to decrease the time, or press the “3/▲” button to increase the time in 1-minute increments. The starting time range is from 0 to 10 minutes.
  • Page 6 Install Smart Life App and setup SPV-T pump to connect to the internet Step 1) Install the Smart Life App from official store. Android (PlayStore) iOS (AppStore) Step 2) Trigger network configuration mode for the SPV-T pump. Step Operation Screenshot Make sure the pump is in off mode.
  • Page 7 Internet connection status Current Speed Power ON/OFF Set Speed Select Preset Speed Schedule Settings...
  • Page 8 EMAUX WATER TECHNOLOGY CO., LTD 2/F, LOCKHART CENTRE, NO. 301-307 LOCKHART ROAD, WANCHAI, HONG KONG YOUR PREMIER SUPPLIER www.emauxgroup.com...

This manual is also suitable for:

Superpower spv165