Related Manuals for emaux SS Series
Summary of Contents for emaux SS Series
- Page 1 SS, SS-T SERIES CENTRIFUGAL PUMP Installation and Operation Manual EMAUX WATER TECHNOLOGY CO., LTD USER MANUAL STRIVE FOR CLEAR WATER www.emauxgroup.com geprüfte Sicherheit EMPU21062401...
-
Page 2: Table Of Contents
(e) by modification of the product; ..WARNINGS AND SAFETY INSTRUCTIONS (f) as a result of war or terrorist attack; or ..1.PRODUCT INFORMATION (g) as a result of service by anyone other than Emaux authorized reseller or authorized agent. 2.INSTALLATION ..3.START UP EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, EMAUX MAKES NO OTHER .. -
Page 3: Warnings And Safety Instructions
HYPERTHERMIA SPA water temperature excess 38°C (104°F) may be injurious to parts with new parts or, at the option of Emaux, serviceable used parts that are health. Measure water temperature before entering SPA. equivalent or superior to new parts in performance. - Page 4 SUCTION ENTRAPMENT HAZARD Key No. Description Part No. This pump produces high levels of suction and creates a strong vacuum at the main drain at the bottom of your pool and spa. This suction is so strong that it can trap adults or children under water if Transparent Lid 01201031 they come in close proximity to a pool or spa drain or a loose or...
-
Page 5: Product Information
DIMENSIONS 01031010 Fan Cover for SQ/SP/SS/SD/ST050-SQ/SP/SS/SD/ST120 02011104 O-Ring for 1.5" Union Notes: 5* 89280105B is 1.5" Union in Black Colour 5* 89280105W is 1.5" Union in White Colour SS SERIES WITH TIMER Code Code Connection Weight Capacitance Capacitance Horsepower Model... -
Page 6: Installation
PERFORMANCE CURVE Key No. Part No. Description 01021065 SS Pump Flange U.S.g.p.m 03011035 M6 x 30 Screw H(m) 02011156 Motor Slinger 89022404 Motor Support 89022109 Motor SD020/SQ020/SS020/ST020(220V/50Hz) 89022110 Motor SD033 (220V/50Hz) 89022105 Motor SD050/SQ050/SS050/ST050(220V/50Hz) 89022106 Motor SD075/SQ075/SS075/ST075(220V/50Hz) 89022107 Motor SD100/SQ100/SS100/ST100(220V/50Hz) SS120 89022108 Motor SD120/SQ120/SS120/ST120(220V/50Hz) - Page 7 8. REPLACEMENT PARTS Pool Water Line Return to Pool Power Cord to Power Receptacle Sand Filter From Pool 12 13 9 10 14 16 22 23 22 23 Above Ground Pool Pump (220V/50Hz) (110V/60Hz) (220V/50Hz) 2.2 ELECTRICAL WIRING Description Key No. Part No.
-
Page 8: Start Up
Bonding Instructions – Permanently wired units will need to include 7. TROUBLE SHOOTING instructions for connecting the solid copper, equipotential bonding conductor. For SS020, SS033, SS050, SS07 and SS120 110V/60Hz Problem description Possible causes version, the size of the bonding conductor should be No. 8 AWG. For Canada the size of 1 Disconnect switch or circuit breaker in off position 2 Fuses blown or thermal overload open the bonding conductor should be No. - Page 9 6.3 Single Cycle Mode Before start-up, the alignment of the pump should be checked. The To switch to Single Cycle Mode, press [timer] tubing should be inspected to ensure that they are properly fitted and for about 3 seconds (the Single Cycle Indicator tightened and that they do not exert pressure or tension on the pump's will come on).
-
Page 10: Routine Maintenance
4. ROUTINE MAINTENANCE 6. TIMER SETTING(FOR TIMER VERSION) 6. 1 CONTROL PANEL The pump mechanical seal requires no lubrication and service. The only routine maintenance needed is the inspection and cleaning of the pre-filter basket. Debris or trash collected in the basket will choke off the water flow through the pump.
Need help?
Do you have a question about the SS Series and is the answer not in the manual?
Questions and answers