Osd Setting Menus; Adjusting Video Settings - HANNspree ST32AMSB User Manual

3.1

OSD Setting Menus

Follow the instructions indicated on the bottom of the OSD Function Menu. Press
on the control panel or
/
CH CH
through the menus. Press INPUT on the control panel or OK key on the remote
control to select an item and then press MENU key to exit the OSD menu.
The following menus can be set by different adjustment methods.
3.2

Adjusting Video Settings

1
Press MENU to enter the OSD Main Menu
screen.
2
Press / on the remote control to
select Video menu.
3
Press / OK on the remote control to
enter the Video menu.
4
Press / on the remote control to select an item.
5
Press / on the remote control to change the scales or press OK on the remote
control to enter an item.
6
Press RETURN to return to the Video menu.
7
Press MENU to exit the Video menu.
The Video menu can be used to adjust the Multimedia, Picture Mode, Back Light,
Brightness, Contrast, Saturation, HUE, Sharpness, Color Temperature,
Advanced Video, and VGA (VGA mode only) settings. Back Light, Brightness,
Contrast, Saturation, HUE, Sharpness, and Color Temperature are only available
for adjustments if you select User in Picture Mode. Press
control to adjust these settings.
• Multimedia can be used to access image and audio files on a USB flash drive.
• Picture Mode can be set to Cinema, Sport, Vivid, Game, or User.
• Advanced Video can be used to set ANR, MPEG NR, Adaptive Luma Control,
Flesh Tone, and Blue Stretch.
• VGA can be used to set Auto Adjust, H.Position, V.Position, Phase, and Clock.
Note:
The items available on the OSD may vary depending on the input signal source.
30
arrow keys on the remote control to scroll
/
For detailed definitions of technology terms, please visit our website at
www.hannspree.com/us (under the services section).
Multimedia
Picture Mode
Back Light
Brightness
Contrast
Saturation
HUE
Sharpness
Color Temperature
Advanced Video
Video OK Enter
/ on the remote
User
70
50
78
50
0
10
Select RETURN Exit