Connecting Usb; Using The Tv; Turning The Tv On And Off; Switching Source Signals - HANNspree ST32AMSB User Manual

2.2.7

Connecting USB

Connect the USB flash drive to the TV using the USB port as shown. The JPEG and
MP3 files are supported.
Note:
The USB HDD (Hard Disk Drive) is not supported.
2.3

Using the TV

2.3.1

Turning the TV On and Off

1 Press on the control panel or remote control. The power LED indicator on
the TV changes from red to green, indicating that the TV is on.
2 Press again. The power LED changes from green to red, indicating that
the TV is off.
2.3.2

Switching Source Signals

Press INPUT on the control panel or remote control to select the incoming source
signal to set TV source for channel search. Press OK to confirm.
2.3.3

Performing an Automatic Channel Search

Before using the TV to view programs, you need to activate the channel search first.
1 Press MENU on the control panel or remote control, then select to enter the
TV menu.
2 Select Tuner Mode to set the signal source to Antenna or Cable.
26
USB
For detailed definitions of technology terms, please visit our website at
www.hannspree.com/us (under the services section).
USB Flash Drive
(Optional)