Setting The Tv On The Wall - HANNspree ST32AMSB User Manual

7

Setting the TV on the Wall

Disassembling the stand base:
1 Disconnect all the cables and cords from the TV to prevent breakage.
2 Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3 Remove the three (3) screws so that the stand base can be removed.
4 Gently remove the stand base.
Wall mounting the TV:
1 Purchase a VESA compatible wall bracket:
VESA 200 X 200, 4 holes, M6, 12 mm, 20kg.
2 Locate your ideal TV position on the wall.
3 Fix the wall bracket firmly on the wall.
4 Secure the TV to the bracket using the 4
mount holes on the back and center of the TV.
Note:
• Please read the instructions of your specific wall bracket to properly wall mount
the TV.
• The pitch of the mounting holes is 200mm horizontally and 200mm vertically.
• The screws type required is metric: M6, 12mm length.
• The 32" TV stand base can be screwed on a table or a hard surface using the
hole on the back of the stand base.
*Installing the LCD TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. Hannspree bears no
responsibility for improper mounting or mounting that results in accident or injury. You can ask
a qualified service personnel about using an optional bracket to mount the TV to the wall.
For detailed definitions of technology terms, please visit our website at
www.hannspree.com/us (under the services section).
(For reference only)
AUDIO
AUDIO
OUT
(FIX) R L
CABLE/
ANTENNA
DIGITAL
AUDIO OUT
(OPTICAL)
PC IN
1 AUDIO
PC/HDMI 1
2 AUDIO IN
USB
IN
AC IN
51