Radial Engineering PRO MS2 User Manual

Balanced mic splitter

Download this manual

USER GUIDE

Radial Engineering Ltd.

1845 Kingsway Ave., Port Coquitlam, BC V3C 0H3, Canada

tel: 604-942-1001 • fax: 604-942-1010

info@radialeng.com

are subject to change without notice. Part# R870 1056 00 / 04-2025

Need help?

Do you have a question about the PRO MS2 and is the answer not in the manual?

Page 1 USER GUIDE Radial Engineering Ltd. 1845 Kingsway Ave., Port Coquitlam, BC V3C 0H3, Canada tel: 604-942-1001 • fax: 604-942-1010 info@radialeng.com © Copyright 2013 all rights reserved. Specifications and appearance are subject to change without notice. Part# R870 1056 00 / 04-2025...
Page 2 . F e a t u r e s mu-metal shield for protection against stray electromagnetic fields. Radial Engineering Ltd. ProMS2 Microphone Splitter...
Page 3 LIFT switch to help reduce ground loop noise. The DIRECT-2 output can be used to send a balanced, mic-level signal to an alternate device such as a recording system. Radial Engineering Ltd. ProMS2 Microphone Splitter...
Page 4 The DIRECT-1 output connects to the mixer that will supply phantom power to condenser mics and active D.I.’s. The ISOLATED output connects to your second audio system and prevents ground loop noise between systems Radial Engineering Ltd. ProMS2 Microphone Splitter...
Page 5 The optional J-CLAMP lets you mount a single Radial device to virtually any surface. It’s perfect for hiding away a mic splitter or direct box in a rack or podium or under a table. Radial Engineering Ltd. ProMS2 Microphone Splitter...
Page 6 Lifts pin-1 on the XLR output RADIAL ENGINEERING 3 YEAR TRANSFERABLE LIMITED WARRANTY RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according to the terms of this warranty.