7
The channel scan may take a while to
complete. Once the automatic search
ends, the TV automatically switches to the
first channel found.
Selecting Your Content Source
You can watch cable or broadcast TV, play DVD or connect to your PC.
To select the source signal:
•
Press
INPUT on the remote control. The Input Source menu
appears.
•
Press
/
to highlight the desired source, then press OK to
confirm.
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1
Press MENU on the remote control or the control panel to display the main menu.
2
Select Channel (
3
Press OK on the remote control to run the channel search.
Selecting Channels
CHp or CHq on the remote control or CH
•
Press
increase / decrease the program number.
•
Press the numeric buttons on the remote control.
14
) > Auto Scan.
Installation Guide - Autoscan
Current Frequency
69000000
Total Channels Found
Status
DTV Scanning
Progress
Press Return to skip DTV scan
Input Source
or CH
on the control panel to
Hz
0
Return
TV
AV1
AV2
YPbPr
PC
HDMI1
HDMI2
HDMI3
USB