Advertisement
Quick Links
JT01-32E2 32" Liquid Crystal Display TV
This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.
Front View
Front View
1
1. Volume down button
2. Volume up button
3. OSD Menu button
4. Channel down button
5. Channel up button
Making Connections
Connecting to Antenna/Cable TV
Connecting to VCR, VCD or DVD Player
The illustrations below show you how to connect your TV to a VCR, VCD or a DVD player.
With RCA AV cable
With YPbPr cable
Connecting the Power Cord
© Copyright 2007 Hannspree, Inc. All rights reserved.
Quick Start Guide
2
3
4
5
6
7
6. Enter button
7. Power button
8. Infrared receiver
9. Power LED indicator
1. Connect one end of the UHF/VHF (Antenna)
or CATV cable to the TV IN jack (UHF/VHF
IN jack) on the back of the TV.
2. Connect the other end of the UHF/VHF
(Antenna) or the CATV cable to the Antenna
or CATV socket.
With S-Video cable
With SCART1
1. Plug the power connector into the AC-IN
input jack on the rear cover of the TV-set.
2. Insert the three-pronged plug at the other
end of the power cord into a power outlet.
3. Turn the main power switch on to supply
power to the TV.
Rear View
Rear View
14
13
8
9
1. Audio Output for AV, S-Video or YPbPr
components (L/R)
2. Audio Input for AV, S-Video or YPbPr/
HDMI-DVI components (L/R)
3. Audio Input for VGA
4. RF Antenna / Cable TV Input
5. SCART2 / SCART2-SV Input
6. SCART1 Input
7. Composite Video input
Getting Started
Selecting Input Source
1. Make sure your TV is turned on and a device
such as a DVD player is connected.
2. Press the SOURCE button on the remote
control and use the / button to select
the required input source between PC, HDMI1,
HDMI2, TV, YPbPr, AV, SVIDEO, SCART1,
SCART2, and SCART2-SV.
3. Press ENTER to confirm your selection.
Auto Channel Scan
Follow the instructions below to automatically preset the channels for your TV
before watching it for the first time.
1. Press the "MENU" button on your remote control or the control panel.
2. Use the / button to select Channel Menu.
3. Press the / button to select country.
4. Press the "ENTER" button to start Auto Scan.
Note: After performing Auto Scan, you need not do it again when turning
on your TV next time.
A u t o S c a n
M a n u a l S t o r e
N a m e
OSD
S e l e c t
12
11
10
9
8
7
6
8. S-Video Input
9. YPbPr/ HD Component Video Input
10. VGA (15 pin) Signal Input from Computer
11. HDMI2 Input Terminal (19 pin)
12. HDMI1 Input Terminal (19 pin)
13. AC Power Input
14. AC Power Switch
TV
HDMI2
HDMI1
PC
Auto Scan
C h a n n e l
U K
E x i t
MENU
JT2002310661P
1
2
3
4
5
YPbPr
AV
SVIDEO
SCART1
SCART2-SV
SCART2
Advertisement
