Lectron V-BOX PRO 48A User Manual page 16

R E S E T T I N G A N D U N B I N D I N G T H E C H A R G E R
If you can't find the charger when adding a device through the Lectron App, you can reset and unbind the charger using
the following steps:
1. Ensure that the charger is not connected to the
previously configured WiFi network. If it is, disconnect
the router first; otherwise, the reset operation will not be
successful.
2. Connect the charger's power cable to a NEMA 14-50
outlet (or hardwire it). Do not connect the charger to the
electric vehicle or start charging at this time.
3. Press the emergency stop button 10, 11, or 12 times
within 5 seconds.
16