BenQ VA261 User Manual page 29

Adding a channel in the sequential channel list
1. From the Setup menu, press
2. Press or to select CH No, and then press OK.
3. Press or to select the sequential channel list position of the channel you wish to add, and
then press OK.
4. Press to select CH skip, and then press OK.
5. Press or to select Added, and then press OK.
6. You can stay in this menu to add other channel positions. To add another channel, repeat this
procedure from step 2 above.
When you're finished, press MENU twice to close the OSD menu.
Swapping channels in the sequential channel list
1. From the Setup menu, press
2. The sequential channel list will display on-screen. Press
you wish to move, and then press OK.
Channel swapping is much easier after you have provided a name for the channels you wish to
retain in the sequential channel list. See
3. Press , , or to select a new position for the channel, and then press OK. The channels
details will be swapped with each other.
4. You can stay in this menu to swap other channel positions. To swap other channels, repeat
this procedure from step 2 above.
When you're finished, press MENU thrice to close the OSD menu.
or to select Manual installation and then press OK.
or to select CH swap and then press OK.
"Naming a channel" on page
, , or to select the channel
28.
The On-Screen Display (OSD) menu 29