BenQ VA261 User Manual page 17

11. REVEAL
Press this button to display any concealed Teletext information.
See "Using the sleep timer" on page
12. SUBPAGE
Press this button to enter the subpage of a Teletext menu.
See "Using the sleep timer" on page
13. TELETEXT
Press this button to turn the Teletext decoder on or off. Page store won't start until the Teletext
decoder is activated. See
14. PIP/PBP
Press this button to simultaneously view signals from two different sources on-screen.
See "Using the PIP and PBP functions" on page
15. / / / and OK
When the OSD menu displays on-screen:
• : Press or
• : Press or
• Press OK to execute selections, or to enter a submenu (if available) you have selected.
See "Navigating the OSD menu" on page
16. FREEZE/Teletext freeze
• Press this button to freeze the image on the screen. Press the button again to resume viewing
in real time. See "Using the freeze function" on page
• When Teletext displays on-screen, press this button to freeze Teletext messages. Press it again
to restore normal update. See
17. ASPECT/Teletext size
• Press this button to adjust the screen image aspect ratio.
See "Adjusting aspect ratio" on page
• When Teletext displays on-screen, press this button to enlarge Teletext size. This will split the
page into two views. Press again to see the next view . Press it again to resume normal size.
See "Using the sleep timer" on page
18. CHANNEL
• Press these buttons to sequentially change channels. See
• When Teletext displays on-screen, press these buttons to go to the previous or next page, or
go to the subpage (if available). See
19. VOLUME +/-
Press these buttons to raise or lower the sound level. See
20. MENU
Press this button to display the OSD menu for commands and settings. Press it again to close.
See "Navigating the OSD menu" on page
21. MUTE
Press this button to mute the sound output. Press it again to restore the sound output.
See "Mute setting" on page
22. Direct channel selection
Press these buttons to select the channel you wish to view.
See "Selecting a channel directly" on page
23. RECALL
Press this button to toggle between the current and the previous channel or input you were
viewing. See "Returning to the previous viewed channel" on page 19.
24. Double digit channel entry
This button is unsupported on this TV range.
See "Selecting a channel directly" on page
20.
20.
"Using the sleep timer" on page
to select settings.
to select or adjust settings.
23.
"Using the sleep timer" on page
19.
20.
/
"Using the sleep timer" on page
23.
18.
19.
19.
20.
21.
20.
20.
"Changing channels" on page
"Adjusting volume" on page
Getting to know the remote control
19.
20.
18.
17