Epson Expression 1640XL User Manual page 162

Installing the TCP/IP Protocol on
Windows 2000
When running Windows 2000, your TCP/IP protocol should automatically be set
correctly for the station it is installed if you are not running a DHCP server. To check
the protocol, follow these steps.
1. Double-click the
Connections
Then, double-click the
Connection
the right.
2. Click the
Local Area Properties screen.
3. Double-click
to display the Internet Protocol Properties
screen.
154
Network & Dial Up
icon in the Control Panel.
Local Area
icon to display the screen to
button to display the
Properties
Internet Protocol (TCP/IP)