Advertisement
Quick Links
1. Safety notes
Please read this manual carefully and completely before you use the device for the first time. The
digital weighing scales are precision instruments that should always be handled with care. Damage or
injuries caused by non-observance of the manual are excluded from our liability and not covered by
our warranty.
The scale must only be used as described in this instruction manual. If used otherwise, this
•
can cause dangerous situations for the user and damage to the meter.
•
Do not put the scale on an uneven surface.
Do not expose the scale to moisture.
•
Do not drop or mistreat the scale.
•
•
Do not overload the scale. This will permanently damage it!
Do not leave weight on the scale when not in use.
•
Do not use the instrument in explosive atmospheres.
•
•
The measurement range as stated in the specifications must not be exceeded under any
circumstances.
•
Replace battery when the scale shows "LO" on the display.
Non-observance of the safety notes can cause damage to the device and injuries to the user.
•
User Manual
Shipping Scale
Model: SF-808
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for VEVOR SF-808
Summary of Contents for VEVOR SF-808
- Page 1 User Manual Shipping Scale Model: SF-808 1. Safety notes Please read this manual carefully and completely before you use the device for the first time. The digital weighing scales are precision instruments that should always be handled with care. Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty.
- Page 2 262 x 309 x 44 mm Display size (L x W) 75 x 30 mm 3. Delivery scope 1x Shipping scale SF-808 1 x wall mounting bracket 1 x user manual 4. First use (1) Open the back cover and take out the indicator Take out this indicator from the back of scale.
- Page 3 Switch on the scale, press the “MODE” button for six seconds until LCD display show capacity and calibration weight. Press TAER button to select calibration weight between 20kg and 50kg. Press MODE button to choose calibration weight. Place the reference weight on the scale according to the value shown on the LCD display. After 2 to 3 seconds, the LCD display will show “PASS”, if the calibration was successful.
Need help?
Do you have a question about the SF-808 and is the answer not in the manual?
Questions and answers