Advertisement
Quick Links
Sectional
Important Notes
Read these instructions carefully, and familiarize yourself with
each procedure before assembling the furniture. Check that you
have all the component parts, and familiarize yourself with each
part before proceeding.
Take all the fittings out of the plastic bag and separate them into
groups. Ensure you have enough space to lay out all the parts
before assembly. To prevent damage to the parts, we recommend
that you assemble the unit on a soft, level surface.
Part List for Power Chaise Right/Left Arm
A. Back
1 piece
Part List for Armless Chair
A. Back
1 piece
Part List for Console
A. Back
1 piece
Part List for Corner
A. Back
2 pieces
B. Seat
Transformer
1 piece
B. Seat
E. Extension
1 piece
B. Seat
1 piece
Transformer
B. Seat
1 piece
C.
D. Wooden Leg
with washer
1 piece
4 pieces
cable
C.
1 piece
Advertisement
Related Manuals for FLEXSTEEL Sectional
Summary of Contents for FLEXSTEEL Sectional
- Page 1 Sectional Important Notes Read these instructions carefully, and familiarize yourself with each procedure before assembling the furniture. Check that you have all the component parts, and familiarize yourself with each part before proceeding. Take all the fittings out of the plastic bag and separate them into groups.
- Page 2 Assembly Instructions Part List for Armless Recliner A. Back B. Seat F. Y-splitter 1 piece 1 piece 1 piece Part List for Power Recliner Right/Left Arm A. Back B. Seat 1 piece 1 piece Transformer 1 piece STEP 1 Remove the pack of Wooden Leg (C) of Chaise from the blue spring. Screw in the 4 wooden legs of Chaise with Washer (C) by turning Wooden legs (C).
- Page 3 Assembly Instructions STEP 3 Attach the Back (A) to the Seat (B). Ensure the latches fit well. Attach the zippers to connect the flap between the back (A) and the seat (B). (See Figure 3) Figure 3 STEP 4 Flip up the back flaps. Connect two cables with headrest labels and two cables with lumbar labels for Chaise / Recliner Right or Left Arm / Armless Recliner then place them behind the flaps.
- Page 4 Assembly Instructions STEP 6 Connect each individual pieces together. Raise up the item with the bolt (male connector) and connect to the item with the female connector or the item with mechanism connecting point. (See Figure 6) Figure 6 STEP 7 Connect both the cables coming out of the bottom back of the piece (Chaise Right / Left Arm or Power Recliner Right / Left Arm + Armless Recliner) each to the two end of Y-Splitter (F) then to the transformer (C) directly.
- Page 5 Disassemble Back To remove the Back (A), disconnect the headrest and lumbar motor connections behind the back flaps and unzip the zipper between the back (A) and the seat (B). Pull up on the leaf springs attached to the brackets, and lift the back (A) away from seat (B).
Need help?
Do you have a question about the Sectional and is the answer not in the manual?
Questions and answers