Download Print this page

FLEXSTEEL Power Recliner with Power Headrest Manual

Download this manual

Flexsteel Power Recliner with Power Headrest

IMPORTANT NOTE

Read these instruc ons carefully, and familiarize yourself with each procedure

before assembling the furniture. Check that you have all the component parts, and

familiarize yourself with each part before proceeding.

Take all the ﬁ ngs out of the plas c bag and separate them into groups. Ensure

you have enough space to lay out all the parts before assembly. To prevent

damage to the parts, we recommend that you assemble the unit on a so , level

surface.

Part List

Assembly Instructions

STEP 1

Detach the wall plug transformer from the bo om of Seat (A). (See Figure 1.) and set it aside to be used in STEP 4.

Figure 1

STEP 2

A ach the Back (B) to the Seat (A). Ensure the latches ﬁt well. (See Figure 2.)

Figure 2

Page 1 Flexsteel Power Recliner with Power Headrest IMPORTANT NOTE Read these instruc ons carefully, and familiarize yourself with each procedure before assembling the furniture. Check that you have all the component parts, and familiarize yourself with each part before proceeding. Take all the ﬁ ngs out of the plas c bag and separate them into groups. Ensure you have enough space to lay out all the parts before assembly.
Page 2 STEP 3 Flip up the back ﬂaps, and remove the headrest cables at the middle bo om from the Backs (B). Plug the Headrest connecters (if applicable). (See the Figure 3.) Figure 3 STEP 4 A ach the power transformer cord found in STEP 1 to the matching Plug found at the bo om rear of The dual power recliner as seen below .