FLEXSTEEL Power Recliner with Power Headrest and Lumbar Manual

Power Recliner with Power Headrest and Lumbar

IMPORTANT NOTE

Read these instructions carefully, and familiarize yourself with

each procedure before assembling the furniture. Check that you

have all the component parts, and familiarize yourself with each

part before proceeding.

Take all the ﬁttings out of the plastic bag and separate them into

groups. Ensure you have enough space to lay out all the parts

before assembly. To prevent damage to the parts, we recommend

that you assemble the unit on a soft, level surface.

A. Back Cushion

1 piece

B. Seat Cushion

1 piece

Detach the transformer which tied to the bottom rail. (See Figure 1.)

Figure 1

Table of Contents

Do you have a question about the Power Recliner with Power Headrest and Lumbar and is the answer not in the manual?

Terri Welch

March 18, 2025

Where did this come out of?? We have looked everywhere..

-1

Page 1 Power Recliner with Power Headrest and Lumbar IMPORTANT NOTE Read these instructions carefully, and familiarize yourself with each procedure before assembling the furniture. Check that you have all the component parts, and familiarize yourself with each part before proceeding. Take all the ﬁttings out of the plastic bag and separate them into groups.
Page 2 Assembly Instructions STEP 2 Attach the Back (A) to the Seat (B). Ensure the latches ﬁt well. (See Figure 2.) Figure 2 STEP 3 Flip up the back ﬂaps, plug the lumbar and headrest connectors(If applicable).(See the Figure 3.) Figure 3 Lumbar Headrest Headrest...