Advertisement
Quick Links
PEARL DRUM RACK SYSTEM
Congratulations on your purchase of the Pearl DR-80 Drum Rack.
Please read this Instruction Manual carefully so that you can get the maximum
Bolt w/Washer (Short)
Spacer
Components
• Straight Bar / 38x38x900mm
• Joint Assembly
Upper Link Plate w/Leg Bracket
Lower Link Plate w/Nuts
Bolt (S) w/Washer (M10 x 25mm) x 2
DR-80
Instruction Manual
performance from your DR-80 Drum Rack.
Steel Leg
(x3)
(x2)
Straight Bar
Joint Assembly
• Steel Leg w/Bolt, Washer (38.1x706mm ) (x4)
Bolt (S) w/Washer (M10 x 25mm) x 2
Spacer x 2
• PC-08 Pipe Clamp
• Hexagonal Wrench
Bolt w/Washer (Short)
(x4)
(x1)
Advertisement
Related Manuals for Pearl DR-80
Summary of Contents for Pearl DR-80
- Page 1 PEARL DRUM RACK SYSTEM DR-80 Instruction Manual Congratulations on your purchase of the Pearl DR-80 Drum Rack. Please read this Instruction Manual carefully so that you can get the maximum performance from your DR-80 Drum Rack. Bolt w/Washer (Short) Bolt w/Washer (Short)
- Page 2 Assembling the DR-80 The square tubes are connected to each other at factory. They should be mounted on the legs as illustrated. Please use the hexagonal wrench for tightening the bolts. Bolt (S) Washer Steel Leg Fig.1 Fig.2 Insert the top of leg into the leg bracket of the joint assembly and tighten the Bolt (S)/ M10x25.
Need help?
Do you have a question about the DR-80 and is the answer not in the manual?
Questions and answers