Advertisement
Quick Links
How do I set up DWR-933M Router with Nano SIM card?
The DWR-933M is a simple portable mobile router that lets you connect to the internet using your
SIM card. It's a plug-and-play device, which means you just insert your SIM card, and it should
automatically connect to the network for internet access.
1
Ensure your SIM card has been registered and has active data plan. To insert your SIM
card, follow these steps:
a. From the back of the device, and with the notch positioned at the bottom-left corner,
lift the back plate upward to detach it from the device.
b. To insert your SIM card, follow the slot's diagram. Push the SIM card holder to
unlock it, insert the nano SIM card carefully, ensure the gold contacts are facing
down, and then pull it to lock it.
2
To put the battery, align the gold contacts at the top center of the battery with the gold
contacts on the device. Then, carefully slide down the battery until it locks securely into
place.
Note: The SSID (network name) and password are printed on the back of device (please take a
photo for your reference incase you need to connect to the Wi-Fi)
3
Power on the device, the home screen will appear. After a few seconds of inactivity, the
screen will power off. To wake up the display, press the Power Button
.
Technical Support Setup Procedure
or WPS Button
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for D-Link DWR-933M
Summary of Contents for D-Link DWR-933M
- Page 1 How do I set up DWR-933M Router with Nano SIM card? The DWR-933M is a simple portable mobile router that lets you connect to the internet using your SIM card. It's a plug-and-play device, which means you just insert your SIM card, and it should automatically connect to the network for internet access.
- Page 2 Then, select Continue to 192.168.1.1 (unsafe) to access the router's login page. If you’re hesitant to proceed due to security concerns, you can review the certificate details to verify its issuer and confirm that it is associated with D-Link by doing the procedure below: o Click the "Not Secure"...
- Page 3 Technical Support Setup Procedure You will be prompted to enter the username and password to access the router’s settings. Username: admin Password: [device password found on the label] After logging in, you’ll be directed to the admin page where you can configure other settings like Wi-Fi and APN.
- Page 4 Download and install the “D-Link Mobile Connect app” from your mobile device’s Play Store / Apple store. Ensure the DWR-933M is powered on. On your mobile device, go to Wi-Fi Settings and connect to the default Wi-Fi network name (SSID) D-LINK2G-XXXX, by default the password printed under the battery on the back of the device.
- Page 5 Technical Support Setup Procedure You'll notice a blue signal bar displayed on the screen, indicating that the router has successfully connected to the internet. Note: If the connection isn't detected, you can manually set up the connection by entering the Access Point Name (APN) specific to your SIM card's carrier. Navigate to Mobile and Look for APN.
Need help?
Do you have a question about the DWR-933M and is the answer not in the manual?
Questions and answers