2 ] Error Codes Shown In The "Machine Error - Brother FAX-750 Service Manual

[ 2 ] Error codes shown in the "MACHINE ERROR _ _" message
Error Code
(Hex.)
( 85
( 87
8A
( 8B
( A1
( A2
( A4
( A5
( A6
( A7
( A8
( AB
( AC
( B9
( BE
( BF
( D5
( D6
E6
( E8
F3
( F5
( F6
Error codes in parentheses do not appear in the "MACHINE ERROR _ _," since those errors are displayed as
messages described in "[ 1 ] Error messages on the LCD."
maintenance mode (Function code 82). If an equipment error occurs during communications, they appear in the
communications error lists.
*These codes marked with an asterisk can appear only in the maintenance mode.
Ink ribbon empty. )
Fails to complete the sequence of recording operation. )
Wrong or weak contact of the recording head connectors.
Recording head overheat. )
Recording paper cover opened. )
Document too long to scan. )
50% or more faulty of white level data. )
Faulty operation of DMA0 during scanning. )
Faulty operation of DMA1 during scanning. )
One-line feeding time-out error. )
One-line scanning time-out error. )
Document feed-in amount measuring error. )
Less than 50% faulty of white level data. )
Light emission intensity error of the LED array. )
Abnormal clamp PWM value )
Light emission intensity error of the LED array at the setting time of initial values. )
The MODEM fails to complete the command transmission sequence. )
No MODEM interrupt for 60 seconds. )
Write error in EEPROM.
Data scanning error during transmission. )
Voice message recording or playing-back not started.
EOL not found in page memory transmission mode. )
PC interface error. )
Error factor
You can display those error codes in the
VI - 3
*
*
*
*