Advertisement
Quick Links
Advertisement
Related Manuals for DeLonghi DEDICA DUO EC890
Summary of Contents for DeLonghi DEDICA DUO EC890
- Page 1 DEDICA DUO logo EC890 COFFEE MAKER Instruction for use...
-
Page 3: Description Of Appliance
Optional cleaning accessories recommended by the manufac- • Put the water tank back in the appliance, pressing lightly turer: for more information, visit www.delonghi.com. to open the valves located on the bottom of the tank. • Connect the appliance to a mains socket. Turn the appli- 2. -
Page 4: Making Espresso
der the hot water/steam wand (A5). the appliance is in stand-by mode, press any icons (B1, B2, B3 or B4) on the control panel. • Turn the steam knob (A4) to position (fig. 4). • When all the indicator lights on the control panel (except B5) remain on steadily, the appliance is ready for use. - Page 5 Place the jug under the hot water/steam wand (A5). • Turn the steam knob (A4) to position; the appliance • Place the pod coffee filter (A17) (not included, available for proceeds to make the froth (fig. 9). purchase at delonghi.com) in the portafilter (A14). Please note: You should not deliver steam for more than 60 • Insert the pod in the filter, centering it as much as possible. seconds. Always follow the instructions on the pod pack to position the pod on the filter correctly.
- Page 6 ○ knob must be closed again (“ ” position). 5. MAKING COLD BREW Please note: before making cold brewed drinks, empty out the water tank (A2), rinse thoroughly and refill with fresh potable water. • Turn the appliance on by pressing the On/Off switch (A6). If the appliance is in stand-by mode, press any icons (B1, B2, To froth the milk, Keep the hot wa- Immerse the hot B3 or B4) on the control panel.
- Page 7 Programmable Corresponding Press to select Press to change Default quantity quantity setting the setting the setting to select from ≃ 15 ml to ≃ 90 ml 35 ml temperature to select from ≃ 30 ml Brewing 70 ml MEDIUM to ≃ 180 ml temperature temperature to select...
- Page 8 8.4 Measuring water hardness lights starts to blinks simultaneously to confirm that the original settings have been restored. (B5) indicator light comes on to require descaling fol- • When all the indicator lights on the control panel (except lowing a predetermined period of operation that depends on a B5) remain on steadily, the appliance is ready for use.
- Page 9 It is important to use De’Longhi descaler only (available for pur- chase at delonghi.com). Using unsuitable descaler and/or per- forming descaling incorrectly may result in faults not covered by brew unit (A7): After every 200 coffees, rinse the brew •...
-
Page 10: Technical Data
11. TECHNICAL DATA • Rinse and fill the water tank to MAX level with fresh water and empty the recipient used to collect the descaler solu- Voltage: 220-240V ~ 50-60Hz. tion and replace it empty. Absorbed power: 1450W • Press Cold brew icon (B1) to start the rinse cycle; (B5) Max. water tank capacity: 1.1 l and Cold brew (B2) indicator lights blink. -
Page 11: Troubleshooting
13. TROUBLESHOOTING Problem Cause Solution No espresso coffee is No water in the water tank (A2). Fill the water tank. Blockage in the cup filters (A15) or (A16). Rinse the cup filters under running water; see “ Clean- delivered. ing cups filter”. The water tank (A2) is not properly in place and Press down lightly on the tank to open the valves at the valves at the bottom are not open. - Page 12 De’Longhi Appliances via Seitz, 47 31100 Treviso Italia delonghi.com...
Need help?
Do you have a question about the DEDICA DUO EC890 and is the answer not in the manual?
Questions and answers