Hardware Installation - Maxtor 1394 External Storage Installation Manual

Personal Storage Installation Guide for Windows – 1394 Interface
3

Hardware Installation

Personal Storage Installation
To connect your new Maxtor Personal Storage
product to your computer, please follow these
simple steps. If these steps are not performed in
order, your product may not function properly.
Power Cord Connections
1. Ensure that your computer is on and running
one of the required operating systems.
2. Plug the four-pin male connector with the flat
side facing up into the back of the product's DC
power-in connector (Figure 1).
Power Connection
Figure 1
3. Connect the female end of the electric cord
into the power adapter (Figure 2).
4. Plug the male connector from the power
adapter into power outlet.
1394 Data Cable Connections
1. Plug one end of the translucent 1394 cable into
any available 1394 port on your computer.
2. Plug the other end of the translucent 1394 cable
into either of the 1394 connections on the
product (Figure 3).
Figure 3
1394 Cable Hook-up
2
Figure 2
Power Adapter Connection