Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Harvest Technology Nodestream NCM
Summary of Contents for Harvest Technology Nodestream NCM
- Page 1 AUDIO INTERFACE Quick Start Guide ®...
- Page 2 Overview ® Welcome to the Nodestream Nodecom (NCM) Please read these instructions carefully before using this product, and save this quick start guide for future use. See the User Manual for full details via the QR code on the back page. Two-way audio streaming solution (or other Harvest audio device) (or other Harvest audio device)
-
Page 3: User Interface
Overview ® Connections USB-A 3.5mm Audio Ethernet WiFi Antenna DC in USB-A Use only supplied or approved PSU and cable. Performance and operation may be affected when using alternatives. Ensure adequate spacing to allow cooling air to travel through vents as shown by the arrows User Interface Status LED... -
Page 4: Operation
Operation ® Status LED Power on (blue) AUDIO INTERFACE Network issue (red) PTT (Push To Talk) Press and Hold Start talking Release to mute Green Open Mic Press 3 times to (Off) Software not running open mic (Blue) Software running Press for 1 (Green) Audio connection active, mic muted... - Page 5 Configuration ® Accessing Web UI Initial network configuration is required via Web UI to set as DHCP or static Open Web UI Via a computer on the same network Connect your device to your LAN and power it up DHCP Enabled Network From the web browser of a PC connected to the same LAN, navigate to: device serial.local - e.g.
-
Page 6: Troubleshooting
7 Turner Ave, Technology Park Bentley WA 6102, Australia harvest.technology All rights reserved. This document is the property of Harvest Technology Pty Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or ®...
Need help?
Do you have a question about the Nodestream NCM and is the answer not in the manual?
Questions and answers