Harvest Technology RiS NCMR Quick Start Manual

Advertisement

Quick Links

NCMR
AUDIO
INTERFACE
Quick Start Guide
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RiS NCMR and is the answer not in the manual?

Questions and answers

Summary of Contents for Harvest Technology RiS NCMR

  • Page 1 NCMR AUDIO INTERFACE Quick Start Guide ™ ®...
  • Page 2 Overview ® Welcome to the Nodestream RiS Nodecom (NCMR) Please read these instructions carefully before using this product, and save this quick start guide for future use. See the User Manual for full details via the QR code on the back page. Two-way audio streaming solution NCMR NCMR...
  • Page 3 Overview ® Rear Connections Ethernet WiFi Antenna DC in USB-A Ensure adequate spacing to allow cooling air to travel through vents as shown by the arrows User Interface Status LED Volume Indicator Start/Stop software PTT (push to talk) button with LED indicator...
  • Page 4 Configuration ® Via web browser Connect the RIS Nodecom device to your LAN via the Ethernet port and power the device Configure the IPv4 settings of a computer connected to the same network 192.168.2.x Subnet 255.255.255.0 Gateway 192.168.2.1 Navigate to http://192.168.2.1 from a web browser and login with User admin Password admin...
  • Page 5 Operation ® Status LED NCMR AUDIO Power on (blue) INTERFACE PTT (Push To Talk) Press and Hold Start talking Release to mute Green Open Mic Press 3 times to (Off) Software not running open mic (Blue) Software running Press for 1 (Green) Audio connection active, mic muted sec to mute...
  • Page 6 7 Turner Ave, Technology Park Bentley WA 6102, Australia www.harvest.technology All rights reserved. This document is the property of Harvest Technology Pty Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or ®...

Table of Contents