Page 2
Overview ® Welcome to the Nodestream Mini (NSM) Please read these instructions carefully before using this product, and save this quick start guide for future use. See the User Manual for full details via the QR code on the back page.
Overview ® Connections USB-A HDMI Ethernet HDMI WiFi USB-A antenna DC in Ensure adequate spacing to allow cooling air to travel through vents as shown by the arrows User Interface Status LED Volume control with button & LED indicator PTT (push to talk) button with LED indicator...
Operation ® Status LED Power on (blue) Video connection (green) Network issue (red) PTT (Push To Talk) Press and Hold Start talking Release to mute Green Open Mic (Off) Software not running Press 3 times to (Blue) Software running open mic (Green) Audio connection active, mic muted Press for 1...
Page 5
Configuration ® Accessing Web UI Initial network configuration is required via Web UI to set as DHCP or static Open Web UI Via a computer on the same network Connect your device to your LAN and power it up DHCP Enabled Network From the web browser of a PC connected to the same LAN, navigate to: device serial.local - e.g.
Bentley WA 6102, Australia harvest.technology All rights reserved. This document is the property of Harvest Technology Pty Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopy, recording or otherwise without the written consent of the ®...
Need help?
Do you have a question about the Nodestream Mini and is the answer not in the manual?
Questions and answers