Advertisement
Quick Links
Operating instructions
Electromagnetic Air Pump
52194, 52195
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Related Manuals for WilTec 52194
Summary of Contents for WilTec 52194
- Page 1 Operating instructions Electromagnetic Air Pump 52194, 52195 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further...
- Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
- Page 3 Handle the pump with care to avoid impact or damage. Store the pump in a dry place and away from corrosive substances. • Avoid extreme temperatures (below 0 ℃ or above 40 ℃) during storage. © by WilTec Wildanger Technik GmbH Item 52194, 52195 Page 3 http://www.wiltec.de...
- Page 4 7. Regularly clean the inlet filter. Clean and replace it in good time. You can check the filter by opening the inlet cover. 8. Do not touch the device with hands or other parts of the body when the air pump is running. © by WilTec Wildanger Technik GmbH Item 52194, 52195 Page 4 http://www.wiltec.de...
- Page 5 (kPa) ⁄ (kPa) ⁄ (A)) (mm) ℓ ℓ 250 × 52194 < 45 180 × 220–240 250 × 52195 < 48 180 × Power chart © by WilTec Wildanger Technik GmbH Item 52194, 52195 Page 5 http://www.wiltec.de 01 2025-1...
- Page 6 Base outlet Rotor holder Housing, lower part Magnetic foot M5×20 hex bolt Membrane disk 2 Feet Diaphragm Screw M4×14 Membrane disk 1 Lateral cover M4 hex nut © by WilTec Wildanger Technik GmbH Item 52194, 52195 Page 6 http://www.wiltec.de 01 2025-1...
- Page 7 Base panel Spindle support ring M4×14 hex bolt Spindle holder M4×14 flange screw Magnetic foot Feet Membrane Screw Membrane base Air chamber outlet Air chamber Base outlet © by WilTec Wildanger Technik GmbH Item 52194, 52195 Page 7 http://www.wiltec.de 01 2025-1...
- Page 8 Open circuit Repair or replace the circuit com- ponents. Thermal protection triggered by Adjust operating mode, select a excessive temperature cooler and better ventilated loca- tion. © by WilTec Wildanger Technik GmbH Item 52194, 52195 Page 8 http://www.wiltec.de 01 2025-1...
- Page 9 German law related to electrical and electronic equipment and appliances. All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossed- out wheeled rubbish bin. This symbol indicates that this electric device must not be disposed of with the domestic waste.
Need help?
Do you have a question about the 52194 and is the answer not in the manual?
Questions and answers