Specifications Basic Information Case Type Mid Tower Dimensions (DxWxH) 518.7 x 290 x 482mm ATX* (305 x 244mm), Micro-ATX*, Mini-ITX Supported Motherboard Sizes * Supports ATX and Micro-ATX back-connect motherboards Cooling Fan Support 3 x 120mm or 3 x 140mm Front Rear 1 x 120mm...
Page 4
Chassis Clearances Maximum CPU Cooler Height 166 mm Maximum GPU Length 380 mm Top Radiator Support 360 mm Rear Radiator Support 120 mm Side Radiator Support 360 mm Bottom Radiator Support 360 mm PSU Support 200 mm Materials Metal Specification SPCC 0.8 mm Front Bezel Material 4mm tempered glass...
Front Bezel Removal Before removing the front bezel, please remove the top panel and side panels on both sides and gently pull out the front panel with your hand. ⚠ CAUTION When pulling the front panel, please pull the plastic shell part with your hands and avoid pulling on the glass to avoid breakage.
Horizontal Graphics Card Installation Before horizontally installing the graphics card, please refer to the Graphics Card Brackets Replacement section and replace it with the Horizontal Graphics Card Bracket.
Vertical Graphics Card Installation Before vertically installing the graphics card, please refer to the Graphics Card Brackets Replacement section and replace it with the Vertical Graphics Card Bracket. The riser cable needs to be purchased separately.
Need help?
Do you have a question about the MAG Series and is the answer not in the manual?
Questions and answers