This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents Monitor MAG 346CQ Documentation Quick Start Guide Stand Accessories...
Installing the Monitor Stand 1. Leave the monitor in its protective packaging. Align and gently push the stand bracket towards the monitor groove until it locks in place. 2. Align and gently push the cable organizer towards the stand until it locks in place. 3.
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. Important ⚠ Avoid touching the display panel when adjusting the monitor. ● -5° 20°...
Page 7
Power LED Lit in white after the monitor is turned on. If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode. Power Button & Navi Key Power Jack Cable Organizer HDMI™...
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Connect the power cord to the monitor power jack. (Figure A) 4. Plug the power cord into the electrical outlet. (Figure B) 5.
OSD Setup This chapter provides you with essential information on OSD Setup. Important ⚠ All information is subject to change without prior notice. Navi Key The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/Down/Left/Right: ●...
OSD Menus Important ⚠ The following settings will be grayed out when HDR signals are received: Night Vision Contrast ● ● MPRT Color Temperature ● ● Low Blue Light PIP/PBP ● ● HDCR AI Vision ● ● Brightness ●...
Gaming 1st Level Menu 2nd/3rd Level Menu Description Game Mode User ● Use Up or Down Button to select and preview mode effects. ● Press the OK Button to confirm and apply Racing your mode type. Night Vision ● This function optimizes background brightness and is recommended for FPS Normal games.
Page 12
1st Level Menu 2nd/3rd Level Menu Description Refresh Rate Location Left Top ● Location is adjustable in OSD Menu. Press the OK Button to confirm and apply your Right Top Refresh Rate Location. Left Bottom ● This monitor follows and works at the Operating System’...
1st Level Menu 2nd/3rd Level Menu Description Adaptive-Sync ● Adaptive-Sync prevents screen tearing. ● Activating Adaptive-Sync will affect: Affected Function Function Status » MPRT Set to OFF » PIP/PBP » Screen Size 1:1 Set to Auto HDMI™ Console Mode ● The Console mode offers broader compatibility with more console devices.
1st Level Menu 2nd Level Menu Description Image Enhancement ● Image Enhancement enhances image edges to improve their acutance. Weak Medium Strong Strongest Image 1st Level Menu 2nd/3rd Level Menu Description Brightness 0-100 ● Properly adjust Brightness according to the surrounding lighting.
Input Source 1st Level Menu 2nd Level Menu Description HDMI™ 1 ● Users can adjust Input Source in any mode. HDMI™ 2 Auto Scan ● Users can use the Navi Key to select Input Source at below status: ● While “Auto Scan” is set to “OFF” with the monitor at power saving mode;...
Navi Key 1st Level Menu 2nd Level Menu Description ● All Navi Key items can be adjusted via OSD Menus. Down Brightness Left Game Mode Right Screen Assistance Alarm Clock Input Source PIP/PBP Mode Refresh Rate Info. On Screen Night Vision Settings 1st Level Menu 2nd Level Menu...
Page 17
1st Level Menu 2nd Level Menu Description HDMI™ CEC ● HDMI™ CEC (Consumer Electronics Control) supports Sony PlayStation®, Nintendo® Switch™, Xbox Series X|S consoles and various audio-visual devices that are CEC-capable. ● If HDMI™ CEC is set to ON: ● The monitor will automatically power on when the CEC device is turned on.
Specifications* Monitor MAG 346CQ Size 34 inch Curvature Curve 1500R Panel Type Resolution 3440 x 1440 (UWQHD) Aspect Ratio 21:9 Brightness Typical SDR: 300 nits Contrast Ratio 4000:1 Refresh Rate 180Hz Response Time 1ms (MPRT) ● HDMI™ Connector x 2 ●...
Page 19
Monitor MAG 346CQ Operating Environment ● Temperature: 0℃ to 40℃ ● Humidity: 20% to 90%, non-condensing ● Altitude: 0 ~ 5000m Storage Environment ● Temperature: -20℃ to 60℃ ● Humidity: 10% to 90%, non-condensing * Some technical specifications of the device may be subject to change by the manufacturer.
Preset Display Modes Important ⚠ All information is subject to change without prior notice. ● HDMI™ VRR (Variable Refresh Rate) synchronizes with Adaptive-Sync (ON/ OFF). For ● VRR ON/OFF status, please check Adaptive-Sync. Standard Default Mode (HDMI™ Console Mode OFF) Standard Resolution HDMI™...
Page 21
Standard Resolution HDMI™ Video Timing Resolution 480P 576P 720P 1080P @60Hz @120Hz 2560x1080 @60Hz @120Hz HDMI™ VRR Used for PS5 VRR HDMI™ Console Mode ON Standard Resolution HDMI™ 640x480 @60Hz @67Hz @72Hz @75Hz SVGA 800x600 @56Hz @60Hz @72Hz @75Hz 1024x768 @60Hz @70Hz @75Hz...
Page 22
Standard Resolution HDMI™ Video Timing Resolution 480P 576P 720P 1080P @60Hz @120Hz 2560x1080 @60Hz @120Hz 2160P @50Hz @60Hz HDMI™ VRR Used for PS5 VRR PIP Mode (Not Support HDR) Standard Resolution HDMI™ 640x480 @60Hz @67Hz @72Hz @75Hz SVGA 800x600 @56Hz @60Hz @72Hz @75Hz...
Troubleshooting The power LED is off. ● Press the monitor power button again. ● Check if the monitor power cable is properly connected. No image. ● Check if the computer graphics card is properly installed. ● Check if the computer and monitor are connected to electrical outlets and are turned on.
● Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ● If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Page 26
● If any of the following situations arises, get the device checked by service personnel: ● The power cord or plug is damaged. ● Liquid has penetrated into the device. ● The device has been exposed to moisture. ● The device does not work well or you can not get it working according to the User Guide.
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com...
Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.
HDMI™ Logos are trademarks or registered trademarks of HDMI™ Licensing Administrator, Inc. Technical Support If a problem arises with your product and no solution can be obtained from the user’ s manual, please contact your place of purchase or local distributor. Alternatively, please visit https://www.msi.com/support/ for further guidance.
Need help?
Do you have a question about the MAG 346CQ and is the answer not in the manual?
Questions and answers