Audio Settings - Panasonic CQ-C5301U Operating Instructions Manual

E

Audio Settings

N
G
L
I
S
H
25 [SQ] (Sound Quality)
Preset Buttons [2] to [6]
Volume
Default: 18
Setting range: 0 to 40
Bass/Treble
You can adjust the bass and treble sounds.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: –12 dB to +12 dB (by 2 dB)
SQ Adjustment
You can adjust the characteristics of the currently selected
sound type (SQ).
It is also possible to preset up to 5 different adjusted SQs.
Tone/SQ adjustable range: –12 dB to +12 dB (by 2 dB)
SQ Low/Bass : ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid : ± 12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble : ± 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
¡ The bass/treble control frequency is fixed to the frequency
that has been selected for SQ.
FTo return an adjusted SQ to the default setting
q Press [SQ], and select the SQ which is to be returned to
the default setting. (Only for main unit)
w Press and hold [BAND] for more than 2 seconds.
26
CQ-C5401U/C5301U
Turn [VOLUME]. (Press [VOL ] or
}
] on the remote control unit.)
[VOL {
Press [VOLUME]
(PUSH SEL: select).
(Press [SEL] on the
remote control unit.)
[[] / []]
[{] / [}]
[BAND]
[DISP] (Return to the regular mode)
Press [VOLUME] (PUSH SEL)
to open the menu.
Press [VOLUME] (PUSH SEL) .
Press [VOLUME] (PUSH SEL) .
Press [VOLUME] (PUSH SEL) .
The SQ adjustment mode can be
established also by pressing [SQ]
for more than 2 seconds.
(Page 28)
Regular mode VOLUME
SUBW LPF SUBW LEV
Note:
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 sec-
onds in the SQ adjustment), the display returns to the regular mode.
¡ The volume can also be adjusted directly using [VOLUME] on the main unit.
¡ Please refer to page 11 for calling up a preset SQ.
Turn [VOLUME].
q : Up
w : Down
Turn [VOLUME].
q : Up
w : Down
Turn [VOLUME].
q : Up
w : Down
q
Press [[] or []] to select a frequency
band (Low, Mid, High).
[[]: Higher frequency band
[]]: Lower frequency band
Turn [VOLUME] to select a frequency.
q: Higher frequency
Note:
w: Lower frequency
¡ You cannot save w
Press [}] or [{] to adjust the level.
any SQ presetting
[}]: Up
value in [1] button.
[{]: Down
¡ Any SQ adjust-
e
ments will not
Press and hold one of the preset buttons
change the call up
from [2] to [6] for more than 2 seconds.
screen names such
¡The adjusted SQ is preset in the num-
as ROCK and JAZZ.
ber of the selected button, and return
to the regular mode resumes.
¡When you suspend the SQ preset adjustment, each level remains your recent
adjustment until a new SQ presetting operation is performed or you call up
the SQ preset.
BASS TREBLE
SQ SET
FADER BALANCE
(a Page 11)
Frequency
The selected frequency band
blinks.
Level
CQ-C5401U/C5301U
E
N
G
L
I
S
H
26 1
27