multicomp pro MP711002 User Manual page 2

Safety Information
Important safety instructions must be followed for operating and storing the power supply. To
ensure your personal safety, read the following instructions carefully before operation to
ensure that the power supply is in the best working environment.
Safety Symbol
Danger! High Voltage
Ground Terminal
Safety Guidelines
General
Do not block and isolate the air inlet and vent

Avoid physical impact or using the instrument improperly

Do not discharge static electricity onto the instrument

Only professionals should open the instrument

For indoor use only

Operating temperature 30°C (32°F~86°F), ≤75% / 30°C~40°C (86°F~104°F), ≤50%

Storage temperature and humidity: -10~50°C (14°F~122°F), ≤50%

Operating Altitude: ≤2000m

Pollution degree: 2

Level of Overvoltage: CATEGORY ll

AC Input
AC input voltage: 110V/120V/220V/230V, 50/60Hz

Connect the protective ground wire to the earth to avoid shock hazard.

Fuse Type
Corresponding fuse type for the model:

Model
MP711002
Make sure to use the correct fuse type before starting up

To prevent fires, only replace with fuses that meet the model and rating value

Do not connect the power cord before replacing the fuse to avoid electric shock

Confirm the cause of the blown fuse before replacing the fuse

Caution
100V/120V
T6.3AL/250V(20X5mm)
220V/230V
T3.15AL/250V(20X5mm)