Registering Pin Code; Selecting The Bluetooth Device You Wish To - Kenwood KDC-BT948HD Instruction Manual

Registering PIN Code

By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Enter Bluetooth mode
Press the [ ] button.
✍ You can also select from "Settings" in Menu List
mode.
2
Enter PIN code edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "BT Settings"
Code Edit".
The current setting of PIN code is displayed.
3
Input the PIN code
Operation type
Select the numbers.
Move to the next digit.
Delete the last digit.
4
Register a PIN code
Press the [VOL] knob.
If "Completed" is displayed, registration is
completed.
5
Exit BT Settings mode
Press the [ ] button.
⁄
• By default, "0000" is specified.
• A PIN code can be specified with up to eight digits.
> >
"Detailed Setup"
Operation
Turn the [VOL] knob.
Press the [¢] button.
Press the [4] button.
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Enter Bluetooth mode
Press the [
✍ You can also select from "Settings" in Menu List
mode.
2
Select Bluetooth device selection mode
"PIN
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "BT Settings"
Selection".
3
Enter Bluetooth device selection mode
Press the [VOL] knob.
"(name)" is displayed.
4
Select the Bluetooth device
Turn the [VOL] knob.
5
Set up the Bluetooth device
Press the [VOL] knob.
"✱(name)" or "-(name)" is displayed.
"✱": The selected Bluetooth device is busy.
"-": The selected Bluetooth device is on standby.
" " (blank): The Bluetooth device is deselected.
6
Exit BT Settings mode
Press the [
⁄
• If a Bluetooth device is already selected, deselect it, and
then select a different one.
] button.
> >
"Pairing" "Phone
] button.
English
51
|