Auto Memory Entry; Preset Tuning; Hd Radio™ Setting; Direct Access Tuning - Kenwood KDC-BT948HD Instruction Manual

⁄
• This setting can be made when "Type Normal" is selected
for the "Tuner Preset Type" of

Preset Tuning

Recalling the stations in the memory.
1
Select the radio band
2
Enter Menu List mode
Press the [MENU] button.
3
Select a desired station in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "List & Memory"
HD Radio™ Setting
You can select following HD Radio Setting items.
1
Select the HD Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings".
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
"Settings"
"Seek Mode" Selects the tuning mode of the radio.
"Auto1": Automatic search for a station.
"Auto2": Search in order of the stations in the
Preset memory.
"Manual": Normal manual tuning control.
"Auto Memory" Memorizes 18 stations (FM) or 6 stations (AM)
with good reception automatically.
Refer to
"Receive Mode" Sets the receive mode of the HD Radio receiver.
"Auto": Automatically tunes to analog broadcast
"Digital": Digital broadcasts only.
"Analog": Analog broadcasts only.
"TAG Memory" Displays the tag memory usage of HD Radio
receiver. Up to 50 tags can be registered to
this unit.
"0"/"50"
"Tagging" Turns ON / OFF the tag memory function of
HD Radio receiver.
"OFF"/"ON"
<Initial Settings> (page
>
Preset number.
<Auto Memory Entry> (page 22)
when there is no digital broadcast.
( : Factory setting)
5
Make a setting
Press the [4] or [¢] button.
6
38). Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Function of remote control

Direct Access Tuning

Tuning in a desired radio station by entering the
frequency.
1
Select the radio band
2
Enter Direct Access Tuning mode
Press the [DIRECT] button.
"– – – –" is displayed.
3
Select Tuning item
Press the [DIRECT] button.
Pressing the [DIRECT] button each time switches
the following tuning items as follows.
Items
Frequency
Channel
Cancelling Direct Access Tuning
4
Enter the frequency or Channel
Press the number buttons.
Example of frequency input:
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
5
Tune in to the entered frequency or Channel
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
Display
"– – – –"
"HD –"
—
Press button
[9], [2], [1]
[8], [1], [0]
23
|
English