Related Manuals for SEWOO SLK-TS200
Summary of Contents for SEWOO SLK-TS200
- Page 1 Aroot Co., Ltd. 28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi- do, 18103, Republic of Korea TEL : +82-31-8077-5000 / FAX : +82-31-624-5310 http://www.miniprinter.com TS200 ENG Rev.A 09/2024...
- Page 2 MODEL : SLK-TS200 Mini Printer User’s Manual All specifications are subject to change without notice...
- Page 3 This device co mplies with part 15 of the FCC Rules. Operation is subject to the following two conditions. 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Tim Kloeker 19700 S Vermont Ave Ste 200 Torrance, CA 90502 | USA NA_Sales@miniprinter.com...
- Page 4 Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
-
Page 5: Table Of Contents
Table of Contents Safety Precautions 1. List of product packing 2. Product appearance 3. Button names, indicators and functions 4. Installation and use 4.1. Connection of printer 4.2. Installation of paper scroll 5. Function overview 5.1. Self-test instructions 5.2. How to enter hexadecimal mode 5.3. -
Page 6: Safety Precautions
Safety Precautions Precautions 1 Do not use or store in locations subject to high temperature, humidity or pollu- tion levels. 2 Connect the power adapter into a properly grounded outlet. Do not share the same plug socket with electrical motors or other equipment which may cause the power supply voltage fluctuations. - Page 7 For better safety and reliability, adhere to the following precautionary measures. Read and follow the instructions carefully before operation of the product. Indication Prohibition Must follow Unplug the power from the Do not disassemble outlet Grounding to prevent Do not handle the product electric shock with wet hands WARNING...
- Page 8 WARNING Failure to follow these instructions could result in fire, electric shock, other injuries, or property damage. Do not disas- semble, repair or Do not unplug the modify the product. power cable to turn Potential risk of malfunc- off the product. tion, electric shock, or Turn off the power us- fire.
-
Page 9: List Of Product Packing
1. List of product packing Your printer box should include these items. If any items are damaged or miss- ing, please contact your dealer for assistance. The Printer AC adapter and Power cord Serial Cable USB Cable Quick Manual Roll Paper... -
Page 10: Product Appearance
2. Product appearance Rubber Roller Component Flap Front Cover FEED STATUS Middle Frame PAPER Open Button ERROR POWER Base Power Switch All cables connect to the connector panel on the back of the printer which is shown below: POWER SUPPLY INTERFACE SERIAL INTERFACE INTERFACE OF CASHBOX USB INTERFACE... -
Page 11: Button Names, Indicators And Functions
3. Button names, indicators and functions Cover open button Control panel LED indicator Feed button Top cover - Cover open button : Press to open the top cover, to insert paper roll Control panel (See Troubleshooting Chart below) : Light on when the printer is powered on. : Light on when the printer is in an error state. -
Page 12: Installation And Use
4. Installation and use 4.1. Connection of printer y Connect the adapter cable to printer’s power interface. y Connect the interface cable to the back interface of the printer. y Connect the line of cashier box to the interface of cashier box behind the printer. DC24V SERIAL ETHERNET... -
Page 13: Installation Of Paper Scroll
4.2 Installation of paper scroll Follow the steps below to install the roll paper: 1 Open the top cover by pressing the cover open button. 2 Install the paper as shown in the following illustration. 3 Pull out a small amount of paper, and close the cover. -
Page 14: Function Overview
5. Function overview 5.1. Self-test instructions Make sure the printer is connected to power and turned off. Keep pressing the FEED button, turn on the power. A self- test page will automatically print in about 2 seconds. 5.2. How to enter hexadecimal mode Run self-test. -
Page 15: How To Resolve Cutter Paper Jams
5.3. How to resolve cutter paper jams - Method 1 : Cycle the power to the unit. - Method 2 : A . Turn the printer off. - Method 2 : B. Open the control panel. - Page 16 - Method 2 : C. Turn the white gear on the cutter, and take jammed paper out. - Method 2 : D. Only when the cutter is turned back to the initial (home) position, the top cover can be closed. CAUTION - Do not damage the printhead and auto cutter by forcing the cover open.
-
Page 17: Driver Of The Printer
There are two ways to drive the thermal bill printer, one is to install the driver di- rectly with WINDOWS, and the other is to use the port to drive directly. 1 Double click “SEWOO Windows Driver.exe”. 2 Select : I accept the agreement. - Page 18 3 Create a shortcut on the desktop. 4 Setup Completed:...
- Page 19 5 Select the correct interface port: 6 Select the proper printer series and click “Install Now”.
- Page 20 7 Click “Yes” to configure the port. 8 Choose the detected USB00X, click apply, shown as below:...
- Page 21 9 Select the “General” tab and then “Print Test Page” :...
-
Page 22: Printer Interface
7. Printer interface 7.1. Power interface SIGNAL NAME +24V SHELL 7.2. Cash-box interface Cash-box control : 6-wire RJ-11 socket, output DC24V/1A power signal to drive the cash-box for action. SIGNAL NAME FGND Drawer 1 CASH Drawer 2... -
Page 23: Usb Interface
7.3. USB interface SIGNAL NAME VBUS D- (DATA-) D+ (DATA+) 7.4. Serial interface SIGNAL NAME... -
Page 24: Ethernet Interface
7.5. Ethernet interface SIGNAL NAME GREEN+ GREEN- YELLOW+ YELLOW-... -
Page 25: Specifications
8. Specifications Printing Method Direct Thermal Printing Speed 250 mm/sec Resolution 203 DPI Dot Pitch 0.125mm x 0.125mm Printing Width 72mm (576 Dots/Line) Font A - 42 columns / 30 columns 180dpi Font B - 59 columns / 40 columns Number of print columns... - Page 26 1 : USB(B type)+Serial(RS-232C_9pin) +Ethernet Built-in 2 : USB(B type)+Serial(RS-232C_9Pin) Standard +RJ45(Serial) Interface Bluetooth Smart Ready (Bluetooth5.0+BLE) Option or WiFi(802.11 a/b/g/n) 1 circuit (24V, Max. 1A) for ‘USB(B type)+ Serial(RS-232C_9pin)+Ethernet Built-in’, 2 circuit (24V, Max. 1A) for ‘USB(B type)+ Cash drawer Serial(RS-232C_9pin)+RJ45 (Serial)’...
Need help?
Do you have a question about the SLK-TS200 and is the answer not in the manual?
Questions and answers