SEWOO SLK-TS400 Series User Manua
  1. Manuals
  2. Brands
  3. SEWOO Manuals
  4. Printer
  5. SLK-TS400
  6. User manua

SEWOO SLK-TS400 Series User Manua

Receipt printer
Hide thumbs Also See for SLK-TS400 Series:
Table of Contents

Advertisement

Quick Links

Aroot Co., Ltd.
28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi- do, 18103, Republic of Korea
TEL : +82-31-8077-5000 / FAX : +82-31-624-5310
http://www.miniprinter.com
TS400 ENG Rev. I 01/2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLK-TS400 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SEWOO SLK-TS400 Series

Summary of Contents for SEWOO SLK-TS400 Series

  • Page 1 Aroot Co., Ltd. 28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi- do, 18103, Republic of Korea TEL : +82-31-8077-5000 / FAX : +82-31-624-5310 http://www.miniprinter.com TS400 ENG Rev. I 01/2021...
  • Page 2 MODEL : SLK-TS400 SERIES Receipt Printer User’s Manual All specifi cations are subject to change without notice...
  • Page 3 This device co mplies with part 15 of the FCC Rules. Operation is subject to the following two conditions. 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Vic Barczyk 19700 S Vermont Ave Ste 200 Torrance, CA 90502 | USA sales@miniprinter.com...
  • Page 4 Disposal of Old Electrical&Electronic Equipment(Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronics equipment.

  • Page 5: Table Of Contents

    Table of Contents 1. Parts Identifications 2. Setting up the printer 2.1 Unpacking 2.2 Connecting the cables 2.3 Loading the roll paper 3. Control panel and other functions 3.1 Control panel 3.2 Error Indicating 4. Self Test 5. ASCII Print 6.

  • Page 6: Parts Identifications

    1. Parts Identifications CONTROL PANEL Features LED indicators to indicate printer status and switches to operate the printer. PRINTER COVER Open this cover to load or replace a paper roll. POWER SWITCH Used to turn on/off power to the printer. COVER OPEN PUSH BUTTON Push down this button to open the printer cover.

  • Page 7: Setting Up The Printer

    2. Setting Up the Printer 2-1. Unpacking Your printer box should include these items. If any items are damaged or miss- ing, please contact your dealer for assistance. The Printer Roll Paper Adaptor(Option) USB Cable(option)

  • Page 8: Connecting The Cables

    2-2. Connecting the Cables All cables connect to the connector panel on the back of the printer which is shown below: SLK-TS400 CASH DRAWER CONNECTOR POWER CONNECTOR INTERFACE CONNECTOR INTERFACE CONNECTOR (USB) (SERIAL) SLK-TS400EB RESET CASH DRAWER CONNECTOR POWER CONNECTOR INTERFACE CONNECTOR INTERFACE CONNECTOR (ETHERNET)
  • Page 9 2-2-1. Interface Connector D-SUB 25 Female Serial USB “B” Type 1 2 3 4 5 3 6 7 8 Link END Status LED Ethernet Ethernet Interface SIGNAL Data Out + Output Data + Data Out - Output Data - Data IN + Input Data + Data IN - Input Data -...
  • Page 10 USB Interface SIGNAL Description DATA- Printer transmit data line DATA+ Printer transmit data line System Ground 2-2-2. Cash Drawer Connector The printer can operate two cash drawers with a 6 pin RJ-11 modular connector. The driver is capable of supplying a maximum current of 1.0A for 510ms or less when not printing.

  • Page 11: Loading The Roll Paper

    2-3. Loading the Roll Paper NOTE Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. Turn off power switch. 1 Make sure that the printer is not receiving data;...
  • Page 12 5 Note the correct direction that the paper comes off the roll: 6 Pull out a small amount of paper roll as shown. Then, close the cover. 7 Tear off the paper as shown.
  • Page 13 CAUTION: When the cutter is jammed, please follow the steps below. 1 Turn off the power. 2 Press the cover open button and open the cover. : Be carefull of cutter blade because the cutter blade might be come out. OPEN 3 Turn on the power, the cutter will automatically reset.

  • Page 14: Control Panel And Other Functions

    3. Control panel and other functions 3-1. Control panel You can control the basic paper feeding operations of the printer with the button on the control panel. The indicator lights let you to monitor the printer’s status. Control Panel Button The button can be disabled by the ESC c 5 command.

  • Page 15: Self Test

    4. Self Test The self-test result indicated whether the printer is operating properly. Also with this, user can check following options or status of the printer. Control circuit Printer mechanism Printing quality ROM version Interface setting This test is independent of any other equipment or software. Running the self test 1 Make sure the printer is turned off and the printer cover is closed properly before performing the self test.

  • Page 16: Ascii Print

    5. ASCII Print ASCII PRINT is printing a test page constructed ASCII code. You can able to check the printer works properly with this The ASCII PRINT test automatically ends and cuts the paper after printing the follow- ing: *** Completed *** The printer is ready to receive data as soon as it completes the ASCII PRINT.

  • Page 17: Paper Reduce

    6-2. Paper Reduce Reduce menu (Line space, Line feed, barcode[1D] height) was developed for paper saving. - Line space “Line space” means the amount of feed when you intentionally generate newlines. - Line feed “Line feed” means the amount of feed when there is an automatic line break. - Barcode Height “Barcode Height”...

  • Page 18: Printer Setting

    7. Printer Setting Change the printer settings. The options below can also be changed via the Memory Saver. PRINTER SETTING 01 SELECT BAUDRATE 02 SELECT CUTTING MODE 03 SELECT ERROR BEEP OPTION 04 SELECT MELODY OPTION 7-1. Baudrate After entering the BAUDRATE MODE, the list which can select the BPS will be printed. Similar like Self Test, you can press the FEED button to select a BAUDRATE.

  • Page 19: Melody

    7-4. Melody To DK Port (Cash), Melody box or external buzzer can be connected. You can activate it from the Melody Setting menu, and the melody will operate after the cutting operation. - Melody Box : Melody is fixed and volume can be adjusted. - External Buzzer : 3 types of melody are output according to the Melody Type set- ting and volume control is not included SELECT MELODY OPTION...

  • Page 20: Hexadecimal Dump

    8. Hexadecimal Dump This feature allows experienced users to see exactly what data is coming to the printer. This can be useful in finding software problems. When you go into the hex dump function, the printer prints all commands and other data in hexadecimal format along with a guide section to help you find specific com- mands.

  • Page 21: Peripherals Connection (Option)

    9. Peripherals Connection This product can communicate with other devices via Bluetooth or Wi-Fi com- munication and cable. 9-1. Bluetooth Connection Optional 1 The Printer can be connected to devices equipped with Bluetooth communication capacity(PDAs, PCs, etc.) 2 Use the Bluetooth connection function supported by the device to connect to the printer.

  • Page 22: Printer Cleaning

    10. Printer Cleaning If the interior of the printer is dusty, printing quality can be lowered. In this case, follow the instructions below to clean the printer. NOTE 1 Make sure to turn the printer power off prior to cleaning 2 Regarding print head cleaning, as the print head is very hot during printing, turn off the printer power and wait approximately 10 minute before start.

  • Page 23: Specifications

    11. Specifications Printing Method Direct Thermal Printing Speed Max. 220 mm/sec Resolution 180 DPI Dot Pitch 0.141mm x 0.141mm Printing Width Max. 72mm Number of print columns Font A - 42 columns / Font B - 56 columns EAN-8, EAN-13, Code 39, Code 93, Code 128, ITF, UPC-A, UPC-E, Codabar Barcode PDF 417, QR code, DATA MATRIX...
  • Page 24 Cash drawer 1 circuits(24V, 1A Max.) MCBF 60 million lines Reliability TPH Life 160Km Type Guillotine Cutter Life 1,500,000 cuts Paper Thickness 0.06 ~ 0.09mm 100 ~ 240Vac 50/60 Hz Power 24Vdc / 1.75A Size 130 x 140 x 154 [W x D x H (mm)] Weight 1.25kg Operation...

  • Page 25: Command List

    12. Command List Command Function REMARKS Horizontal tab Print and line feed Print and carriage return Print and return to standard mode(in page mode) Cancel print data in page mode DLE EOT Real-time status transmission DLE ENQ Real-time request to printer DLE DC4 Generate pulse at real-time ESC FF...
  • Page 26 Command Function REMARKS ESC t Select character code table ESC { Turn upside-down printing mode on/off FS p Print NV bit image FS q Define NV bit image GS ! Select character size GS $ Set absolute vertical print position in page mode GS * Define downloaded bit image GS /...

  • Page 27: Utilities

    Printer F/W and Font Download are available, and Download Tool BT, Wi-Fi module F/W Download is supported as an (F/W) option. It is a utility app that prints text, barcodes, images, Android Utility etc. through Bluetooth and Wi-Fi communication, (Sewoo M_Utility) and able to printer settings.

  • Page 28: S/W

    Mac Driver printer in the Mac OS environment. Android Plugin This is a print service plug-in that allows you to print (Sewoo Print documents, images, and web pages without install- Service Plugin) ing additional apps. This is library for communication and data output with Thermal printer in Windows OS.
  • Page 29 Name Description This is library for communication and data output iOS SDK with Thermal printers in iOS. This is library for communication and data output Linux SDK with Thermal printers in Linux. PATENT...

Table of Contents