Page 1
Sabina SeatStrap is designed for use with Liko Sabina™ sit-to-stand lifts only. The SeatStrap is always used together with one of Liko’s support vests. Furthermore, the lift must be completed with the Sabina SeatStrap SlingBar.
Page 2
Symbol Description These symbols can be found in this document and/or on the product. Symbol Description Warning; this situation requires extra care and attention. Read instructions for use before use CE mark Legal manufacturer Date of manufacturing Product Identifier Serial Number Medical device Do not dry clean Do not iron...
Page 3
• Plan the lifting operation so that it can be done as safely and smoothly as possible. • Although Liko’s sling bars are equipped with latches, special caution must be exercised. Before the patient is lifted from the underlying surface, but after the straps have been fully extended, make sure the straps are correctly connected to the sling bar hooks.
Page 4
Combinations The Sabina SeatStrap is intended for use only with Liko Sabina™ sit-to-stand lifts and Sabina SeatStrap SlingBar. Combinations of accessories/products other than those recommended by Liko can result in risks for the safety of the patient. www.hillrom.com Liko AB Nedre vägen 100...
Need help?
Do you have a question about the Sabina SeatStrap and is the answer not in the manual?
Questions and answers