Jumper Setting - eMachines EL1852G Service Manual

Item Code
15 AUDIO1
16 SYS_FAN1
17 ATX12V1
18 USBLAN1
19 VGA1
20 PSKBM2

Jumper Setting

The section explains how to set jumper for correct configuration of the mainboard.
Use the motherboard jumpers to set system configuration options. Jumpers withmore than one pin are
numbered. When setting the jumpers, ensure that the jumpercaps are placed on the correct pins.
The illustrations show a 2-pin jumper.When the jumper cap is placed on bothpins, the jumper is SHORT. If you
re-move the jumper cap, or place the jumpercap on just one pin, the jumper is OPEN.
This illustration shows a 3-pin jumper. Pins 1 and 2 are SHORT.
EL1852 Service Guide
Component
Rear audio jacks (microphone, line-out, and line-in jacks)
System fan cable connector
4-pin ATX power connector
USB 2.0 and Ethernet ports
Monitor port
PS/2 keyboard and mouse ports
67