Itch Setup - Denon DN-HC5000 - Serato ITCH Hardware/Software Package Operating Instructions Manual

Q1 Beat-Matching Display
Shows transients (usually the drums) to visually
aid beat-matching.
Q2 Tempo-Matching Display
Displays tempos of both tracks to visually aid
mixing.
Q3 Status Bar
Displays the status of the currently selected
item.
Q4
Virtual Deck
Visual representation of the virtual deck.
Q5 5 BPM Field / Tap
Displays the track's BPM. You can click this
field to "tap" out a time, from which the
software will approximate and save a new
BPM. If there is no BPM for the track, it
will display TAP to prompt you to tap out a
suggested tempo.
Q6 Track Time Display
Displays the current position of the playhead
in the track.
Q7
Loop Number
Displays the number of the currently selected
loop.
Clicking the "lock" icon next to it will disable
any changes to the current loop.
Clicking the "X" icon next to it will delete the
current loop.
Q8 REPEAT
Toggles Repeat Mode "On" or "Off" for the
track (when Playback Mode is set to "Single")
or Crate (when Playback Mode is set to
"Continuous").
Whenever a new track is loaded, this will
default to "Off."
Q9 PLAYBACK
Toggles between "Single" and "Continuous"
Playback Modes.
Single Playback Mode plays only one track,
stopping when it is finished.
Continuous Playback Mode will automatically
play the next track in the Crate when one track
ends.
Whenever a new track is loaded, this setting
will remain the same.
W0 RANGE
Displays the current range applied to the
PITCH SLIDER.
W1 Waveform
Waveform of the currently loaded track. The
top waveform is the left deck; the bottom is
the right deck.
W2 PITCH
Applied pitch offset as a percentage (%)
(determined by the position of the PITCH
SLIDER).
W3 Artist Name
"Artist" tag for the current track.
W4
Track Name
"Title" tag for the current track.
W5 Track Overview
An overview of the currently loaded track's
entire waveform.
W6 Crates
Displays the list of Crates and Sub-Crates
available.

4. ITCH Setup

SOFTWARE INSTALLATION
• Free updates to the ITCH software are available
from http://www.serato.com/itch
• We suggest you check the website for the latest
version before installing.
INSTALLATION Windows
The installer should start automatically, if not;
• Either
Insert the Serato ITCH install CD into your
computer's CD drive and browse to it using
Windows Explorer.
• Or
Browse using Windows Explorer to the location
where the ITCH download installer was saved,
unpack the ITCH .zip file and browse to the
extracted contents.
• Then:
Double click the file called "ITCH_installer.exe".

ENGLISH
ENGLISH
1. The following screen will appear. Click Next.
2. Accept the License Agreement and then click
Next.
3. Choose the location you want to install to and
click Next.