Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvet DJ MINI KINTA ILS
Summary of Contents for Chauvet DJ MINI KINTA ILS
- Page 1 User Manual...
-
Page 2: Table Of Contents
Display Timeout ....................Display Orientation..................... Firmware Version ....................IRC-6 Infrared Remote Control ..............Master/Slave Mode (Wired) ................Master/Slave Mode (D-Fi USB)..............ILS Mode....................... 5. Maintenance..................Product Maintenance ..................6. Technical Specifications..............Returns ....................Contact Us....................Mini Kinta ILS User Manual Rev. 1... -
Page 3: Before You Begin
Electronically published by Chauvet in the United States of America. Chauvet, Chauvet DJ, the Chauvet logo, and Mini Kinta ILS are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies. -
Page 4: Safety Notes
Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Page 2 of 15 Mini Kinta ILS User Manual Rev. 1... -
Page 5: Introduction
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause damage to the product. Product Dimensions 10.1 in 7.2 in 258 mm 182 mm 7.5 in 190 mm Mini Kinta ILS User Manual Rev. 1 Page 3 of 15... -
Page 6: Setup
3. Setup AC Power The Mini Kinta ILS has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 7: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Mini Kinta ILS may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming. -
Page 8: Operation
_ _ Shows current firmware version Configuration (DMX) The Mini Kinta ILS works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf. Personality and Starting Address The Mini Kinta ILS uses 4 DMX channels in DMX mode, which defines the highest configurable address to 509. -
Page 9: D-Fi Usb Connectivity
Operation D-Fi USB Connectivity The Mini Kinta ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from Chauvet DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D-Fi receiving/transmitting channel, then plug it into the D-Fi USB port. -
Page 10: Dmx Channel Assignments And Values
128 255 Motor speed, slow to fast 000 004 No function Automatic/sound-active program 005 200 Automatic program, slow to fast (overrides Ch. 1-3) 201 255 Sound-active program Page 8 of 15 Mini Kinta ILS User Manual Rev. 1... -
Page 11: Configuration (Standalone)
5. Repeat steps 3-4 until the product output is set as desired. Configuration (Settings) Display Timeout To set whether the display of the Mini Kinta ILS will turn off after a period of inactivity, follow the instructions below. 1. Press <MENU> repeatedly until LEd shows on the display. -
Page 12: Irc-6 Infrared Remote Control
Operation IRC-6 Infrared Remote Control The Mini Kinta ILS is compatible with the IRC-6 infrared remote control from Chauvet. Consult the following table to run the Mini Kinta ILS with the IRC-6. IRC-6 Button Function <AUTO> Press to activate automatic mode <SOUND>... -
Page 13: Master/Slave Mode (Wired)
Master/Slave Mode (D-Fi USB) The D-Fi USB allows a single Mini Kinta ILS product (the “master”) to control the actions of one or more Mini Kinta ILS products (the “slaves”) without the need of a DMX controller or DMX cables. The master (transmitter) product will be set to operate in standalone mode or with the IRC-6, while the slave (receiver) products will be set to operate in DMX mode. -
Page 14: Maintenance
7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Do not spin the fan using compressed air because it could be damaged. Page 12 of 15 Mini Kinta ILS User Manual Rev. 1... -
Page 15: Technical Specifications
Thermal Maximum External Temperature Cooling System 104 °F (40 °C) Convection I/O Connector Channel Range 3-pin XLR Ordering Product Name Item Code UPC Number Mini Kinta ILS 10051880 781462222284 Mini Kinta ILS User Manual Rev. 1 Page 13 of 15... -
Page 16: Returns
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Page 14 of 15 Mini Kinta ILS User Manual Rev. 1... -
Page 17: Contact Us
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record. Mini Kinta ILS User Manual Rev. 1 Page 15 of 15...
Need help?
Do you have a question about the MINI KINTA ILS and is the answer not in the manual?
Questions and answers