Computer Setup-Exit; Recovering The Configuration Settings; Backing Up The Cmos; Restoring The Cmos - HP dx2040 - Microtower PC Service & Reference Manual

Table 2-6 Computer Setup—PC Health
Option
Current CPU
Temperature
Current System
Temperature
System Fan Speed
Smart Fan Function
Computer Setup—Exit
Table 2-7 Computer Setup—Exit
Option
Save & Exit Setup
Exit Without Saving
Load Optimized
Defaults

Recovering the Configuration Settings

Recovering the configuration settings established in the Computer Setup (F10) Utility requires that you
first back up the settings before a recovery is needed.
The CMOS Save/Load utility can be found at
for your specific model. Download the firmware files into a folder on a removable storage device. It is
recommended that you save any modified computer configuration settings to a diskette, a USB flash
media device, or a diskette-like device (a storage device set to emulate a diskette drive) and save the
diskette or device for possible future use.

Backing Up the CMOS

1. Make sure the computer to be backed up is turned on. Connect the removable storage to the
computer.
2. Boot to DOS.
3. Type N:\folder\BIOS.exe SAVE:ABC001.DAT (where N is the drive letter of the removable
storage) to save the CMOS setting to the removable storage device.

Restoring the CMOS

1. Make sure the target computer is turned on. Connect the removable storage to the target computer.
2. Boot to DOS.
3. Type N:\folder\BIOS.exe LOAD:ABC001.DAT (where N is the drive letter of the removable
storage) to load the custom CMOS setting onto the target system.
12 Chapter 2 Computer Setup (F10) Utility
Description
(view only)
(view only)
(view only)
Disables/enables smart fan functionality.
Description
Allows you to save current settings and exit Computer Setup.
Allows you to exit Computer Setup without saving changes.
Allows you to reset Computer Setup to factory defaults.
http://www.hp.com under the Software & Driver Downloads