Deca SINGLE BASIC Instruction Manual page 26

BOWL INSTALLATION INSTRUCTIONS
ATTENTION: For a perfect installation of the product, adhere to
the measurements below (in millimeters):
Water point
1 Cut the sewer trap tube to a maximum of
10 mm above the floor.
2
Draw a reference line parallel to the wall in
the middle of the sewer line.
3 Cover the floor with cardboard and place the
ware upright with the help of another person.
Then draw a line from the center of the water
outlet to the ends. Transfer the marking to
the side of the bowl.
Position the bowl so that the floor line
4
matches the side line and use the base to
create a reference contour of the product.
Mark the center of the mounting hole on the
5
bowl and on the floor. This mark refers to the
attachment of the bowl.
Sewer line
(trap) 10 mm
high
6